Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Evaluating the Effect Effects of U-turns on Level of Service of Signalized Intersections Using Synchro and SimTraffic

Traffic Signal Control Optimization Strategy Based on Simulation

Calculation method of travel time of right-turn vehicle at motor-and nonmotor-vehicle mixed traffic intersection

Development of a Procedure for Using Surrogate Safety Assessment Model and VISSIM for Safety Assessment at Signalized Intersections

Evaluation of an Exclusive Spur Dike U-Turn Design with Radar-Collected Data and Simulation

Analysis om waiting area for left-turn vehicles at signalized intersections

Comparing Roundabouts and Signalized Intersections Through Multiple-Model Simulation

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Analysis of a Signalized Intersection with Dynamic Use of the Left-Turn Lane for Opposite through Traffic

Comparative study on simulation performances of CORSIM and VISSIM for urban street network.

Method of computing left-turn vehicle traffic capacity at two-phase intersection

Planning methods and effect analysis of advance right-turn

Signal Timing Method of Right——turn Vehicles Based on Mixed Traffic

Bicycle Conversion Factor Calibration at Two-Phase Intersections in Mixed Traffic Flows

Modeling Capacity at Signalized Intersections with a Left-Turn Storage Bay Considering Signal Timing Plan

Evaluating How Right-Turn Treatments Affect Right-Turn-on-red Conflicts at Signalized Intersections

Consequence Analysis of Left-Turn Driver's Scrambling Behavior to Traffic Efficiency at a Two-Phase Signalized Intersection

Evaluation and Simulation Study of Traffic at Intersection of Wuhan Heping Avenue-Jianshe No.2 Road

Modeling the performance of restricted crossing U-turn intersections including the effects of connected and autonomous vehicles: a case study in California

Unprotected Left-Turn Behavior Model Capturing Path Variations at Intersections

Survival Analysis on Passing Time of Minor Vehicle’s Road Crossing at Un-Signalized Intersection in China