Abstract:The flux observer method is widely utilized as a sensorless control technique in which the stator or rotor flux of IPMSM can be measured with a closed-loop observer or an integrator. However, DC-offset (DCoff), the ramp signal, and harmonics are consistently present in the acquired rotor flux because of an unidentified starting value, errors in the integral computation's current detection, and the inverter's nonlinearity. The aforementioned interference signals will drastically reduce the sensorless control efficacy. This work introduces an enhanced flux estimator with a negative feedback loop and PI controller to overcome the DC drift problem resulting from a pure integrator and a low-pass filter. Moreover, an optimal design approach of flux estimator structures with a broad range of speeds for Interior permanent magnet synchronous motor (IPMSM) drives is proposed, which utilizes an integrated topology of the voltage and current models incorporating a DC-offset PI-correction loop, actual and estimated flux magnitude's correction error. The flux vector's initial inaccuracy is eliminated, together with the DCoff and drift in the acquisition channel. A phase-locked-loop state estimator is utilized to derive the speed and position from the actual and estimated flux. The effectiveness and superiority of the suggested approach were proven by simulation and experimental findings for the IPMSM drives, which displayed high dynamic performances over varying scenarios. This reliable approach, including sensorless control, is suitable for all AC motors with sinusoidal flux distributions over a wide speed range.

Improved Rotor Flux Estimator for Sensorless Induction Motor

Improved Rotor Flux Estimation Based on Voltage Model for Sensorless Field-Oriented Controlled Induction Motor Drives

IMPROVED U-I MODEL ROTOR FLUX ESTIMATOR FOR INDUCTION MOTOR

An Improved Rotor Flux Estimation Model Based on Stator Voltages and Currents

ROTOR FLUX ESTIMATOR OF INDUCTION MOTOR BASED ON STATOR CURRENT VECTOR ORIENTATION

Adaptive Rotor Flux Estimation and Parameter Identification for Induction Motor

Sensorless adaptive rotor flux direct vector-controlled induction motor drive based on fuzzy logic control flux estimator

Modified Algorithm for Voltage Module Flux Estimation with Lowpass Filter

Speed-Sensorless Control of Induction Motor Drives with a STA-FLL Speed Estimation Scheme

Study of Improved Flux Observer and Speed Identification Based on PLL Controller

A Novel Flux Estimator Based on Multiple Second-Order Generalized Integrators and Frequency-Locked Loop for Induction Motor Drives

Improved Speed Estimation Method Based on MRAS Observer for Sensorless Induction Motor

Experimental Investigation of Improved DC-Offset Compensation Loop for Flux Estimator in IPMSM Position and Speed Sensorless Control Drives

Online Decoupled Stator and Rotor Resistances Adaptation for Speed Sensorless Induction Motor Drives by a Time-Division Approach

An Improved Voltage Model Integral Algorithm of Induction Motors based on the Orthogonality between Back EMF and Flux

Adaptive Flux Estimation and Parameters Identification of Induction Motors Based on Model Reference Approach

Speed Sensorless Stator-Flux-oriented Control of IM Drive with Stator Resistance Compensation

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

Study on rotor flux-oriented speedless sensor vector control method of induction motor

Sensorless Control for Five-phase Induction Motors With Improved Third-harmonic Current Injection