Abstract:Ultrasonic flowmeters (UFMs) based on the principle of transit time difference are widely used in process industries. The transit time difference is obtained through analyzing received acoustic signals generated by a couple of transducers located upstream and downstream respectively. The quality of received acoustic signal will directly affect the measurement accuracy of UFM. For this reason, a measurement-calculation coupled approach combining measurement tools and numerical simulation for calculating the acoustic signal of UFM is proposed in this paper. The method can predict the acoustic signals of UFM with different flowrates. First, important boundary condition (vibration velocity on transmitter transducer surface) is measured by measurement tool, which can reduce computational complexity and also avoid modeling transmitter transducers. Second, simulating the wave propagation (difficult to access experimentally) within moving medium by using the measured vibration velocity. Third, obtaining the transfer function of receiver by comparing estimated force acting on the receiver transducer surface with measured voltage signal from receiver, which can avoid modeling receiver transducer. Finally, predicting the received acoustic signal at different flowrates by using the transfer function. The rationality of predicted data was validated by comparing experimental and predicted acoustic signal on receiver transducer at different flowrates. A good agreement between simulated and experimental data was obtained, which means that the working processes of the acoustic signal generated by actual transducers inside UFMs can be accurately predicted based on this method. Analysis of the predicted results will provide good guides and advices to the design of UFMs involving actual application.

High-speed and Precise Measurement for Ultrasonic Liquid Flow Metering Based on a Single FPGA

Implementation of High Precision Time Measuring Method of Travel Time Ultrasonic Flowmeter

Development of FPGA and DSP Based flow rate measurement and control system

A Method to Avoid the Cycle-Skip Phenomenon in Time-of-flight Determination for Ultrasonic Flow Measurement

A Device and Method For Flowrate Measurement of Fluid in Small Channel Based on C~4D Technique

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

Design and Implementation of an Ultrasonic Flowmeter Based on the Cross-Correlation Method

A New Method for Flow Rate Measurement in Millimeter-Scale Pipes.

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

A New Contactless Method For Velocity Measurement Of Bubbleand Slug In Millimeter-Scale Pipelines

An optical non-contact flow-meter of conveyor belt based on FPGA

Method of Ultrasonic Flow Rate Measure Based on Delta-T and TDC-GP2

Design of the Precise Ultrasonic Flow Measuring System

A New Type Of Ultrasonic Gas Flowmeter With Multi-Tracks

An Electrical and Ultrasonic Doppler System for Industrial Multiphase Flow Measurement

Optimization design and research of ultrasonic flowmeter based on time difference method

Design of a High Precision Ultrasonic Gas Flowmeter

Design and implementation of digital instrument based platform for ultrasonic flow-meter

An ultrasonic flowmeter for liquid flow measurement in small pipes using AlN piezoelectric micromachined ultrasonic transducer arrays

Similarity Judgment-Based Double-Threshold Method for Time-of-Flight Determination in an Ultrasonic Gas Flowmeter

Digital Signal Processing Implementation Of A Novel Ultrasonic Doppler Flowmeter