Abstract:The health monitoring and damage detection of structures are major scientific issues that the civil engineering discipline, which made great achievements in the 20 th century, has bequeathed to the 21 st century. Despite the installation of health monitoring systems in many large structures, implementing damage detection through finite element model updating is often time-consuming or even infeasible due to the size of the model and the presence of numerous uncertain parameters. To address this issue, this paper proposes a substructure-based model updating method. The entire structure is divided into substructures with reduced degrees of freedom, allowing for the simplification of the motion equation by employing only a small number of low-order modes from each substructure. Consequently, the analysis scale of the structure is effectively reduced. The discarded higher modes are compensated by residual modes to ensure the accuracy of structural response and sensitivity. Subsequently, a damage identification program substructure-based model updating is developed, which is applied to component mode synthesis and damage identification for large structures. By precisely detecting damage in critical areas, accurate diagnosis and evaluation of the global structural safety are achieved. The results validate the implementation, computational efficiency, and accuracy of the proposed substructure-based model updating method. This approach shifts the focus from model updating of the entire structure to model updating of substructures, with the aim of fundamentally resolving the technical challenge of accurate damage detection of large and complex structures. Furthermore, it provides theoretical support for the practical application of damage detection in large civil structures.

A Study On Structural Damage Detection Method Based On Model Updating

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Nonlinear finite element model updating with a decentralized approach

A Substructure-based Model Updating Method to Damage Detection for Large-scale Structures

Model Updating and Damage Detection Using Cross Model Cross Mode Method for 3D Frame Structures

A Two-Stage Model Updating Method for the Linear Parts of Structures with Local Nonlinearities

Experimental and numerical studies on model updating method of damage severity identification utilizing four cost functions

DAMAGE IDENTIFICATION OF CIVIL STRUCTURES BASED ON FINITE ELEMENT MODEL UPDATING

Finite element model updating for structural damage detection using transmissibility data

Structural damage identification using system dynamic properties

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Structural modal identification and MCMC-based model updating by a Bayesian approach

A Survey On Damage Detection Methods: Advantages And Shortages

Structural damage detection using a sensitivity-based model updating approach with autocorrelation function data

Research on Finite Element Model Updating Technique Based on Static Strength Test

Detection of Structural Damage in a Shaking Table Test Based on an Auto-Regressive Model with Additive Noise

Real-Time Structural Health Monitoring and Damage Identification Using Frequency Response Functions along with Finite Element Model Updating Technique

Structural damage identification via physics-guided machine learning: a methodology integrating pattern recognition with finite element model updating

Finite Element Model Updating Using Evolutionary Strategy for Damage Detection

Structural damage identification using static test data and changes in frequencies

Vibration-based Bayesian model updating of an actual steel truss bridge subjected to incremental damage