Abstract:The finite element (FE) model updating is a commonly used tool in civil engineering, enabling damage detection, design verification, and load capacity identification. In the FE modelupdating, acceleration responses are generally employed to determine modal properties of a structure, which are subsequently used to update the numerical model. While the acceleration-based model updating has been successful in finding better approximations of the physical systems, the boundary conditions are considered yet to be difficult to accurately estimate as the acceleration responses only correspond to the translational degree-of-freedoms (DOF).Recent advancements in the sensor technology have enabled low-cost, high-precision gyroscopes that can be adopted in the FE modelupdating to provide angular information of a structure. Especially, as the angular DOF is closely related to the rotational stiffness, gyroscopes in the FE model updating would give information of boundary conditions. This study proposes a FE modelupdating strategy based on data fusion of acceleration and angular velocity. The use of acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. In this paper, a numerical simulation is presented to demonstrate the proposed FE modelupdating approach using the data fusion. A beam modelled using the Euler-Bernoulli beamelement is consideredwith various boundary conditions (i.e., simply supported, fixed supports, and in between). Optimization variables of the FE model updating are selected to be the elastic modulus and the rotational stiffness of two supports. The proposed FE modelupdating based on acceleration and angular velocityis shown to be able to more accurately identifythe boundary condition than the sole use of acceleration. Consequently, this paper verifies that data fusion of acceleration and angular velocity enhances the performance of the FE modelupdating. Graduate Research Assistant Research Assistant Professor Chair Professor 4) Assistant Professor

Study on model updating for a steel frame based on optimization theory and vibration test results

Nonlinear finite element model updating with a decentralized approach

Finite element model updating and response prediction of a frame structure based on optimal sensor placement

Vibration-based Bayesian model updating of an actual steel truss bridge subjected to incremental damage

Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization

The Composite Methods of Updating Finite Element Models

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

Structural modal identification and MCMC-based model updating by a Bayesian approach

Model updating of a bridge structure using vibration test data based on GMPSO and BPNN: case study

Finite Element Model Updating using Acceleration and Angular Velocity *Hyun-jun

Time history analysis-based nonlinear finite element model updating for a long-span cable-stayed bridge

Benchmark model updating for cable stayed bridges

High-Efficiency Finite Element Model Updating of Bridge Structure Using a Novel Physics-Guided Neural Network

A sensitivity-based nonlinear finite element model updating method for nonlinear engineering structures

Substructure-based model updating using residual flexibility mixed-boundary method

Finite element model updating for structural applications

Experimental validation of an efficient strategy for FE model updating and damage identification in tubular structures

A Two-Stage Model Updating Method for the Linear Parts of Structures with Local Nonlinearities

Evaluation of long-service-life cable-stayed bridge strengthening schemes using a two-phase finite element model updating technology

Effects of Model Updating on the Estimation of Stochastic Seismic Response of a Concrete-Filled Steel Tubular Arch Bridge

Application of Steel Equivalent Constitutive Model for Predicting Seismic Behavior of Steel Frame