Abstract:Titanium has a low density and high corrosion resistance. In order to achieve the goal of a lightweight material, and to extend the normal working hour of proton-exchange membrane fuel cells (PEMFCs), ultra-thin titanium plates were chosen to manufacture the key components-bipolar plates (BPs). For the purpose of overcoming the challenges of manufacturing with a large depth to width ratio, a multi-stage formation process was established with characteristics such as high efficiency and a lower price. In this study, the process parameters were examined through an experimental approach. The outcomes show that the channel formed by multistage forming is deeper than that formed by single-stage forming under the same displacement conditions. To achieve greater flow depths, it is recommended to increase the displacements as much as possible during both the first- and second-stage forming processes. The implementation of three-stage forming can effectively reduce the maximum thinning rates within flow channels while improving the overall deformation uniformity. This method deviates from traditional one-stage loading processes by adopting multi-stage loading instead. By employing appropriate mold designs, material deformation and flow can be enhanced throughout gradual loading processes, thereby preventing strain concentration and enhancing the ultimate formation height accuracy within micro-flow channels. Consequently, the proposed three-stage forming process proves highly appropriate for the mass production of BPs utilizing titanium plates.

Flow Field Plate Of Micro Fuel Cell Fabrication In Uv-Nanoimprint Lithography

Simple and Cost-Effective Fabrication of Two-Dimensional Plastic Nanochannels from Silica Nanowire Templates

Microfluidic fuel cells integrating slanted groove micro-mixers to terminate growth of depletion boundary layer thickness

Fabrication of 1-d nanochannels on PMMA substrate by photoresist-free uv lithography and UV-assisted bonding under low temperature

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Integrated fabrication of micro/nano-fluidic chip based on nano-imprint lithography and bonding

Characterization of Microfluidic Fuel Cell Based on Multiple Laminar Flow

Micro Etching Method Inside Microchannels

Nanoimprint of Proton Exchange Membrane for MEMS-based Fuel Cell Application

Fabrication of micro/nano fluidic channels by nanoimprint lithography and bonding using SU-8

Silicon Nano-Column Fabricated by Catalytic Etching for Electrode of Fuel Cell.

Fabrication of Large-Area Nanostructures Using Cross-Nanoimprint Strategy

Lowering the Pressure Drop and Cost of a Proton Exchange Membrane Fuel Cell by Flow Field Plate Design

Investigation into the Three-Stage Formation of Micro-Channels with Ultra-Thin Titanium Sheets Used for Proton-Exchange Membrane Fuel Cell Bipolar Plates

Application of Nanoimprint Technology in MEMS-Based Micro Direct-Methanol Fuel Cell ( $\Mu$-Dmfc)

Nanofabrication of air-spaced field-plate gates with ultra-short footprint

Nano porous silicon membrane with channels for micro direct methanol fuel cells

Design and Fabrication of Fuel-Self-Propelled Reaction Device for Passive Micro Direct Methanol Fuel Cell Anodes

In Situ Synthesis Of 3d Platinum Nanoflowers On Porous Silicon For Monolithic Integrated Micro Direct Methanol Fuel Cells

An Innovative Miniature Microbial Fuel Cell Fabricated Using Photolithography.

Fabrication of Micro/Nano-filter by building sacrificial structure with colloid crystal