Abstract:The high-speed serial transceiver plays a key role in the high-speed data transmission. Because of the independent clock network in each transceiver, there exist random skews between the multiple transceivers each time the system reinitializes. In the system of data transmission, these random skews are always permitted and the intrachannel synchronization is guaranteed by inserting some same comma codes in each channel. However, for the strict clock distribution system, these random skews are unacceptable. To address this problem, a scheme combined of a tunable phase interpolator (PI) and a high-precision time-to-digital converter (TDC) is presented. A plain TDC is employed to measure the skews of parallel clocks in multichannels with bin size of similar to 10.2 ps and precision of similar to 18.0 ps. The method of multiple measurements average is adopted to further improve the TDCs performance. On this basis, time synchronization with root mean square (rms) of similar to 2.5 ps and peak-to-peak value of similar to 14.7 ps is implemented in a 20-nm fabrication process ultrascale field programmable gate array (FPGA). Compared to the measured results (rms of similar to 22 ps and peak-to-peak value of similar to 105 ps) of the Xilinx self-phase alignment method, the presented scheme has more than six times performance improvement. In addition, this scheme can lock the delay between different channels to arbitrary configurable offsets, making it very suitable for scenarios where multichannel latencies are strictly restricted.

Time Synchronization Design Based on Fpga in Integrated Gps/Ins System

A High Accuracy Time Keeping Scheme Based on GPS

The High-Precisiontime System Design of Pico-Satellite Based on GPS Receiver

IEEE 1588 Based Time Synchronization System for a Seafloor Observatory Network

Design and implement of GPS receiver synchronization module based on FPGA

High Precision Synchronization System Based on FPGA

Hardware-based Solution of Precise Time Synchronization for Networked Control System

Design and Implementation of High-Precision Timing Module for NR Terminals Based on FPGA

Implementation and Analysis of IEEE 1588 PTP Daemon Based on Embedded System

Design and FPGA Verification of a Novel Reliable Real-Time Data Transfer System

Precision Analysis and Improvement of GPS High Accurate Short Timing Scale Based on FPGA

The design of GPS high accurate short timing scale based on FPGA

A High-Precision 2.5-Ps RMS Time Synchronization for Multiple High-Speed Transceivers in FPGA

Design of Multifunction Digital Clock Based on FPGA

A 3.8 ps RMS time synchronization implemented in a 20 nm FPGA

Integrative FPGA Design of GPS Digitized IF Signal Generator

A Hybrid Time Synchronization Optimization Scheme for Onboard Payloads with Independent Clock

High Accurate Time Stamping Approach for Time Synchronization Within Networked Instrument Bus

Effective Pps Signal Generation with Predictive Synchronous Loop for Gps

Design of multi-channel synchronization signal acquisition method based on FPGA

A Mixed Approach for Clock Synchronization in Distributed Data Acquisition Systems