Abstract:In order to accurately characterize and evaluate dust particle diffusion in the dynamic tunneling process of a boring machine, this study considers the 31,116 main transport chute heaving face of the Lijiahao coal mine as a case study. A dynamic tunneling model is developed considering the real dynamic tunneling state of the header, to carry out an in-depth analysis of the spatial and temporal evolution of wind flow and dust dispersion in the tunnel under dynamic excavation. In addition, the results were compared against the calculations of a static standard excavation model of a conventional header. Employing CFD analysis accompanied by field measurements, it was highlighted that the dynamic tunneling of the header leads to an increase in the pressure difference and the turbulent kinetic energy at the working face. Moreover, an increase in the number of vortices was reported, and a higher concentration of dust spreads more quickly along the return wind side wall to the return flow area. On the other hand, the high concentration of dust under the standard tunneling model was found to accumulate a lot on the return wind side. Simultaneously, as the distance between the pressurized air outlet and the working face increases, the average wind speed in the vortex-type wind flow area at the front of the tunnel decreases. When t = 60 s, the return flow area expands to a space of 8 m~24 m from the head, and the dust accumulated above the header spreads to the back of the header to form a high concentration dust region of more than 500 mg/m3. It was shown that the range of high-concentration dust clouds in the breathing zone decreases compared to the results of the standard tunneling model. Moreover, the dust concentration in the breathing zone of the driver is significantly lower than that reported by the standard tunneling model. Based on the results of the field test, the average error between the simulated and measured data of the dynamic tunneling model was calculated to be around 6.46%, thus demonstrating the model's capability in describing the real working conditions of the heave tunnel.

Study and application of numerical simulation of dust generation and movement in a fully mechanized excavation face

Numerical Simulation Study on the Movement Characteristics of Dust Flow in Mine Working Face

Numerical simulation and field test of dust control effect of exhaust ventilation in fully mechanized face

3 D Numerical Analysis on the Behavior of Excavation

Numerical Simulation Study of Gas–Liquid–Solid Triphase Coupling in Fully Mechanized Excavation Faces with Variation in Dust Source Points

Numerical Simulation of Suspended Sediment Diffusion and Movement during Excavation

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

Research on dust dispersion law of fully mechanized mining faces under different inclinations and tracking closed dust control method

Numerical Simulation Study on Air-Flow Migration Law about Vortex Air Curtain of Plane Wall Fan Drum

Research on dust control technology and numerical simulation of conical guiding air curtain in fully mechanized excavation face

Experimental and numerical simulation study on forced ventilation and dust removal of coal mine heading surface

Evolutionary analysis of dust pollution in the comprehensive excavation face based on linear regression method

Research on air curtain dust control technology for environmental protection at fully mechanized working faces

Numerical Simulation on Wind-Dust Migration Regularity in Fully-Mechanized Working Face

Numerical Simulation Study of Dust Concentration Distribution Regularity in Cavern Stope

Research on the Dust Diffusion and Pollution Behaviour of Dynamic Tunneling in Header Excavators Based on Dynamic Mesh Technology and Field Measurement

Numerical simulation of dust control technology for longwall working face with convective air curtain

Design and application of a dust suppression technology of the forcing air curtain in fully mechanized rock tunnelling faces

Characteristics of dust distributions and dust control measures around road-header drivers in mining excavation roadways

Study of integrated vortex ventilation and dust removal system in mechanized excavation face

Numerical simulation and application of entrainment dust collector for fully mechanized mining support based on orthogonal test method