Abstract:Advances in Structural Engineering, Ahead of Print. The external excitations, interface forces and responses at the interface degrees-of-freedom are normally required in many existing substructural condition assessment methods, while they are difficult or even impossible to be accurately measured. To address this issue, a digital twin framework for output-only substructural damage identification with data fusion of muti-type responses is proposed in the present paper. First, heterogeneous responses including displacements, strains and accelerations from the target substructure are measured and divided into two sets. The multi-type responses in measurement set 2 are reconstructed with the first set of responses and transmissibility matrix in time domain. Then, a recovery method is introduced to obtain angular displacements from translational displacements and strains, to acquire angular accelerations from translational accelerations and the second order derivatives of strains by continuous wavelet transform. The recovered angular displacements and angular accelerations are involved into the evaluation of objective function. Besides, to avoid the single and monotonous search operation of traditional optimization algorithms, a reinforced learning-assisted Q-learning hybrid evolutionary algorithm (QHEA) by integrating Q-learning algorithm, differential evolution algorithm, Jaya algorithm, is developed as a search tool to solve the optimization-based inverse problem. The most suitable search strategy among DE/rand/1, DE/rand/2, DE/current-to-best/1, Jaya mutation in each iteration is selected and implemented under the guidance of Q-learning algorithm. Numerical studies on a three-span beam structure are performed to verify the effectiveness of the proposed approach. The results demonstrates that the proposed output-only substructural damage identification approach can accurately identify locations and severities of multiple damages even with high noise-polluted responses.

Detection of local damage in large size structures based on substructure and distributed computing strategy

Locate Damage Based on Change in Structural Shape Calculated from Uniform Load Surface

Sequential Multiple Structural Damage Detection and Localization: A Distributed Approach

Structural Damage Detection Using Local Damage Factor

Global–Local Damage Diagnostic Approach for Large Civil Structures with Very Limited Sensors

A Substructure-based Model Updating Method to Damage Detection for Large-scale Structures

Substructure Isolation and Damage Identification Using Free Responses

In-Situ Damage Detection of Wharf Structures Using Local Damage Factor

Damage detection test of a substructure model of the National Swimming Center

Test Analysis of Detection of Damage to a Complicated Spatial Model Structure

Substructural damage identification in a digital twin framework using heterogeneous response reconstruction

A NOVEL STRUCTURAL DAMAGE DETECTION METHOD USING WIRELESS SENSOR NETWORKS

Structural Damage Detection and Localization with Unknown Post-Damage Feature Distribution Using Sequential Change-Point Detection Method

Two-stage damage detection to a benchmark structure using ambient data

An Improved Frequency-Domain Regression Method for Structural Damage Detection in Wireless Sensor Network

Damage identification of single-layer cylindrical latticed shells based on the model updating technique

A data fusion-based approach for structural damage detection with distributed long-gauge strain measurements

Study of structural damage identification based on multi-sensor information fusion

Structural damage detection based on cross-correlation function with data fusion of various dynamic measurements

An Investigation of Structural Damage Location Based on Ultrasonic Excitation-Fiber Bragg Grating Detection

Substructural identification for damage estimation of structures