Abstract:The effect of SiBCN powder on properties of phenolic resins and composites was analyzed. Compared with phenolic resins, the thermal stability of SiBCN powder modified phenolic resins (the SiBCN phenolic resins) by characterization of thermogravimetric analysis (TGA) improved clearly. It was found by X-ray photoelectron spectroscopy (XPS) that reactions between SiBCN powder and the pyrolysis product of phenolic resins were the main factor of the increased residual weight. TGA and static ablation of a muffle furnace were used to illustrate the roles of SiBCN powder on increasing oxidation resistance of SiBCN powder-modified phenolic resin–carbon fiber composites (SiBCN–phenolic/C composites), and the oxidative product was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). For SiBCN–phenolic/C composites, the occurrence of oxidation reaction and the formation of protective crust contributed to improving oxidative resistance. The result of the oxygen-acetylene test showed that the linear ablation rate (LAR) and mass ablation rate (MAR) of phenolic resin–carbon fiber composites reduced from 0.052 ± 0.005 mm/s to 0.038 ± 0.004 mm/s and from 0.050 ± 0.004 g/s to 0.043 ± 0.001 g/s by introducing SiBCN powder, respectively. The mechanism of ablation resistance after the introduction of SiBCN powder was investigated. The high melt-viscosity of SiBCN powder caused SiBCN powder to remain on the surface of composites and protect the internal resins and carbon fibers. The oxidation of SiBCN powder and volatilization of oxide can consume energy and oxygen, thus the ablation resistance of SiBCN–Ph composite was improved.

Study on the Property of Boron Carbide-Modified Phenol-Formaldehyde Resin for Silicon Carbide Bonding

Novel Silicon-Modified Phenolic Novolac Resins: Non-isothermal Curing Kinetics, and Mechanical and Thermal Properties of Their Biofiber-Reinforced Composites

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Phenolic Resin Modified by Boron-Silicon with High Char Yield

Curing and pyrolysis behavior of PF/B4C/PBZ composite

Combined Strengthening Mechanism Of Carbon Fiber/Boron Carbide In Reaction Bonded Silicon Carbide Ceramic

Study of Phase Transition, Structure Modulation, and Thermal Properties of Si/B-modified Bisphenol a Phenolic Resin Ceramicizable Materials

An addition-curable hybrid phenolic resin containing silicon and boron with improved thermal stability

Structure and Heat-Resistance of Boron Modified Phenolic Resin

Improved Performances of SiBCN Powders Modified Phenolic Resins-Carbon Fiber Composites

Reaction-bonded SiC Derived from Resin Precursors by Stereolithography

Preparation and Characterization of Bismaleimide-Resin-Based Composite Materials

Influence of Silicon Addition on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

Effects of silicon addition on the microstructure and properties of B 4 C–SiC composite prepared with polycarbosilane-coated B 4 C powder

Morphology and Reinforcing Behavior of Short Carbon Fiber in Reaction Bonded Silicon Carbide

Oxidation and ablation behaviors of carbon fiber/phenolic resin composites modified with borosilicate glass and polycarbosilane interface

Ceramizable phenolic adhesive modified by different inorganic particles: A comparative study of thermal stability, bonding strength and bonding mechanism

RB-SiC Ceramics Derived from the Phenol Resin Added with Starch

Effect of Boron Carbide on the Liquid Silicon Infiltration and Performance Enhancement of Reaction-Bonded Silicon Carbide Composites

Highly thermally stable Ti/Si/B modified bisphenol A-phenolic resins with co-continuous structure

Bonding properties of C/C composites based on polyborosilazane ceramic precursor films