Abstract:Modifying bismaleimide (BMI) resin to improve its toughness and flame retardancy without sacrificing the glass transition temperature (Tg) and thermal decomposition stability is still a challenge. In this study, we employed the allyl ether of resveratrol (AER) and eugenol allyl ether grafted polysiloxane (PMES‐Allyl) to co‐modify BMI resin. For the BMI/AER/PMES‐Allyl (BAPA) resin, the content of PMES‐Allyl was 15 wt%, and the molar ratio of maleimide and allyl groups was controlled as 1:0.8. Compared to commercial 2,2′‐diallyl bisphenol A modified BMI (BD) resin, the BAPA resin exhibited superior thermal properties after curing, due to the role of AER in improving the crosslinking density and chain rigidity of the network. The cured BAPA resin had a Tg more than 380°C, and its initial thermal decomposition temperature (Td5%) and char yield (Y800°C) reached 424.8°C and 46.4%, respectively. Meanwhile, PMES‐Allyl as a rubber phase could effectively improve the toughness of the cured resin. The impact strength of the cured BAPA resin was 15.2 kJ/m2. Moreover, the two modifiers both helped to improve the flame retardancy of the material. Compared with the cured BD resin, the cured BAPA resin showed a decrease of peak heat release rate (PHRR), total heat release (THR), and maximum average rate of heat emission (MARHE) by 25.5%, 35.5%, and 31.5%, respectively. Its total smoke production (TSP) was only 35.6% of that of the cured BD resin. In addition, the cured BAPA resin also displayed a lowered water absorption and improved thermal aging resistance. Therefore, it is suggested to be a promising and high‐performance thermosetting resin for cutting‐edge applications.

Highly thermally stable Ti/Si/B modified bisphenol A-phenolic resins with co-continuous structure

Study of Phase Transition, Structure Modulation, and Thermal Properties of Si/B-modified Bisphenol a Phenolic Resin Ceramicizable Materials

Phenolic Resin Modified by Boron-Silicon with High Char Yield

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Fabrication and Characterization of Poly (bisphenol A Borate) with High Thermal Stability

Preparation and Properties of Bismaleimide Resins Modified with Hydrogen Silsesquioxane and Dipropargyl Ether and Their Composites

Organic/inorganic hybrid bismaleimide resin with octa(aminophenyl)silsesquioxane

Structure and Heat-Resistance of Boron Modified Phenolic Resin

Effect of Bisphenol-a on the Structures and Properties of Phthalonitrile-Based Resin Containing Benzoxazine

Improving the thermal and mechanical properties of phenolic fiber over boron modified high-ortho phenolic resin

Structural and Thermal Behavior of a Novel Phenolic Resin and Its Composite with Excellent Ablative Performance

Bismaleimide resin co‐modified by allyl ether of resveratrol and allyl ether of eugenol‐grafted polysiloxane with enhanced toughness, heat resistance, and flame retardancy

Preparation and Characterization of Boron and Molybdenum Modified Phenolic Resin

Synthesis And Characterization Of Phenolic Resins Containing Aryl-Boron Backbone And Their Utilization In Polymeric Composites With Improved Thermal And Mechanical Properties

Synthesis and characterization of novel phenolic resins containing aryl‐boron backbone and their utilization in polymeric composites with improved thermal and mechanical properties

An investigation on the effect of phenylboronic acid on the processibilities and thermal properties of bis-benzoxazine resins

Preparation And Properties Of Bisphenol A-Based Bis-Phthalonitrile Composite Laminates

Optimization and preparation of an allyl phenoxy-modified bismaleimide resin

Preparation and characterization of a novel allyl ether naphthalene phenolic modified bismaleimide resin and its composites

Modified Phenolic Resin with Aluminium and Rectorite: Structure, Characterization, and Performance

Bismaleimide Resins Modified by Octa(Aminophenyl) Silsesquioxane