Abstract:Water-based cutting fluid has a broad application area and a hundred year history, but its poor corrosion inhibition and anti-rust ability limit its further promotion. Adding corrosion inhibitors can effectively solve the above problems. However, no review papers are available on cutting fluid corrosion inhibitors, and their mechanism, suitability, and performance influencing factors have not been revealed. This article discusses cutting fluid corrosion inhibitors to fill the gaps in theoretical research and industrial applications. Inorganic matters are initially used in corrosion inhibition due to their strong oxidizing properties. Therefore, the film formation mechanism of inorganic corrosion inhibitor oxide and precipitation film is first analyzed, and the applications in corrosive medium are summarized. Given that inorganic corrosion inhibitors are not environmentally friendly and expensive, organic corrosion inhibitors are currently used as replacement. Thus, the film formation mechanism of different organic corrosion inhibitors adsorption film is analyzed, and their suitability with metals is determined. The influence of molecular structure and temperature on their corrosion inhibition effect is also studied, and the performance of inorganic and organic corrosion inhibitors is compared. However, single organic corrosion inhibitors are greatly affected by metal surface state, temperature, and immersion time. Therefore, the synergistic film formation after the compounding of organic and inorganic corrosion inhibitors is analyzed. In addition, the influence rate of concentration, molecular structure, and temperature on corrosion inhibition performance is revealed, and a matching database of corrosion inhibitor type and metal type in cutting is established. Finally, in view of the limitations of cutting fluid corrosion inhibitors, the establishment of a molecular dynamics model of corrosion inhibitor failure and accelerates corrosion and the development of general-purpose green additives based on the molecular design and physical and chemical analysis of the suitability of corrosion inhibitor and base liquid are prospected.

DEVELOPMENT OF IMIDAZOLINE CORROSION INHIBITOR FOR CORROSIVE MEDIA

Experimental and Theoretical Investigation of 1-Hexyl-3-methylimidazolium Iodide As a Corrosion Inhibitor for Mild Steel in HCl Environment

Development and Performance Evaluation of A Kind of Imidazoline Anti-high Temperature Acidizing Corrosion Inhibitor

A New Imidazole Derivative for Corrosion Inhibition of Q235 Carbon Steel in an Acid Environment

Optimization of the Composition of an Imidazoline-Based Corrosion Inhibitor to Protect Equipment in Carbon Dioxide and Acidic Environments

Research Progress of Organic Corrosion Inhibitors in Metal Corrosion Protection

Halogen-substituted Imidazoline Derivatives As Corrosion Inhibitors for Mild Steel in Hydrochloric Acid Solution

DEVELOPMENT OF CORROSION INHIBITORS FOR STAINLESS STEEL IN HYDROCHLORIC ACID

Optimization of the Composition of an Imidazoline Corrosion Inhibitor for the Protection of Equipment in Carbon Dioxide-Rich and Acidic Environments

Effect of imidazoline derivatives on the corrosion inhibition of Q235 steel in HCl medium: experimental and theoretical investigation

Preparation and Inhibition Performance of Aryl-Imidazoline Quaternary-Ammonium-salt Corrosion Inhibitor

Interfacial Adsorption and Corrosion Inhibition Behavior of Environmentally Friendly Imidazole Derivatives for Copper in the Marine Environment.

The Behavior of Pre-Corrosion Effect on the Performance of Imidazoline-Based Inhibitor in 3 Wt.% NaCl Solution Saturated with CO2

Theoretically and Experimentally Exploring the Inhibition Effect of Imidazole Sulfonic Acid Derivatives with Multiple Adsorption Sites in 1.0 mol/L HCl

Synergistic effect of new imidazoline derivative and 2‐aminopyridine as corrosion inhibitors for Q235: Experimental and theoretical study

Cutting fluid corrosion inhibitors from inorganic to organic: Progress and applications

STUDY ON CORROSION AND INHIBITION MECHANISM IN H2S AQUEOUS SOLUTIONS V .The Inhibition Characteristics of Imidazoline Derivatives in H2S Solutions

1, 10-phenanthroimidazole derivatives as efficient corrosion inhibitors for mild steel in 1 M HCl: synthesis, gravimetric, electrochemical and theoretical investigation

Experimental and Theoretical Study on the Inhibition Performances of Quinoxaline and Its Derivatives for the Corrosion of Mild Steel in Hydrochloric Acid

Mitigation Effect of Quinazolin-4(3H)-one Derivatives on the Corrosion Behaviour of Mild Steel in HCl

Exploration of inhibitory performance of imidazoline on J55 steel