Abstract:Under-deposit corrosion is widely present in the pipelines of oil and gas production, causing significant corrosion damage. In this paper, a novel electrochemical cathodic-polarization method was carried out to accelerate the formation of CaCO3 scale on a X65 steel surface in a simulated solution containing scaling ions. Subsequently, pre-scaled X65 steel was placed in a high temperature and pressure autoclave to conduct corrosion weight-loss experiments and in situ electrochemical measurements. The study mainly compared the corrosion inhibition behavior of four quaternary ammonium salt corrosion inhibitors, pyridinium quaternary salt (BPC), quinolinium quaternary salt (BQC), 8-hydroxyquinolinium quaternary salt (BHQ) and pyridinium (1-chloromethyl naphthalene) quaternary salt (1-CPN), in a simulated oilfield scale under corrosive conditions. The results of the weight-loss experiments demonstrated that the inhibition efficiencies of the corrosion inhibitors from high to low were as follows: 1-CPN < BHQ < BQC < BPC. The in situ electrochemical measurements showed that the immersion time and type of corrosion inhibitor had a pronounced influence on the corrosion and corrosion inhibition behavior of X65 steel with CaCO3 coating. It was also proved using both EIS and PC that 1-CPN shows the best inhibition performance in all. Lastly, the inhibition mechanism of corrosion inhibitors at under-deposit conditions was analyzed via a surface morphology observation of SEM.

Preparation and Inhibition Performance of Aryl-Imidazoline Quaternary-Ammonium-salt Corrosion Inhibitor

Exploration of inhibitory performance of imidazoline on J55 steel

Inhibition Performance of Novel Dissymmetric Bisquaternary Ammonium Salt with an Imidazoline Ring and an Ester Group

Study of the Inhibition Mechanism of Imidazoline Derivative Inhibitor on CO2 Corrosion for Q235 Steel

Study on inhibition behavior of dissymmetric bis-quaternary ammonium with imidazoline ring

The Behavior of Pre-Corrosion Effect on the Performance of Imidazoline-Based Inhibitor in 3 Wt.% NaCl Solution Saturated with CO2

Synthesis of Cationic Imidazoline Corrosion Inhibitor and Its Corrosion Inhibition Performance

Corrosion Inhibition Effect of N-(4-diethylaminobenzyl) Quaternary Ammonium Chitosan for X80 Pipeline Steel in Hydrochloric Acid Solution

Corrosion Inhibition of Dissymmetric Bis-Quaternary Ammonium with Imidazoline Ring on Q235 Steel in 1.0 Mol•l<sup>-1&Lt;/sup> Hydrochloric Acid Solution

Inhibition of the corrosion of carbon steel in hydrochloric acid solution by bisquaternary ammonium salt

Corrosion Inhibition of Dissymmetric Bis-Quaternary Ammonium with Imidazoline Ring on Q235 Steel in 1.0 mol•L<sup>-1</sup> Hydrochloric Acid Solution

Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions

Inhibition of the Corrosion of X70 and Q235 Steel in CO2-saturated Brine by Imidazoline-Based Inhibitor

SYNTHESIS AND PROPERTIES OF QUATERNARY AMMONIUM TRIBENZAL - IMIDAZOLING AS INHIBITOR IN PICKLING SOLUTIONS

Synthesis and Characterization of a Novel Quaternary Ammonium Salt as a Corrosion Inhibitor for Oil-Well Acidizing Processes

Experimental and theoretical investigations of three Mannich-base imidazoline quaternary ammonium salts as efficient inhibitors for Q235 steel in sulfuric acid

Indolizine quaternary ammonium salt inhibitors: The inhibition and anti-corrosion mechanism of new dimer derivatives from ethyl acetate quinolinium bromide and n-butyl quinolinium bromide

Comparison of the Synergistic Effect of Counterions on the Inhibition of Mild Steel Corrosion in Acid Solution: Electrochemical, Gravimetric and Thermodynamic Studies

Development and Performance Evaluation of A Kind of Imidazoline Anti-high Temperature Acidizing Corrosion Inhibitor

Experimental and Theoretical Analysis of Quinoline Diquaternary Ammonium Salt as Corrosion Inhibitor