Abstract:The corrosion phenomenon and its economic impacts can hardly be ignored in any application. This study synthesized a quaternary ammonium salt (3) containing hydrophobic dodecyl and electron-rich diallylbenzyl amine moieties to be used in 15 % HCl as a corrosion inhibitor of mild steel. Several techniques, such as 1H and 13C NMR, IR, TGA, and elemental analysis, have been used to characterize inhibitor 3. Popular corrosion measurement techniques, namely weight loss, potentiodynamic polarization techniques, and electrochemical impedance spectroscopy, have been used to determine the efficiency of inhibitor 3. At 303 K and a moderately low concentration of 50 ppm, the quaternary ammonium salt-based inhibitor demonstrated a maximum efficiency of ≈95.0 %. At elevated temperatures of 313, 323, and 333 K, the inhibition efficacy values were recorded as 91.3, 82.8, and 75.0 %, respectively. Adsorption isotherm study revealed that the adsorption of inhibitor 3 followed Langmuir adsorption isotherm. The value of Δ G a d s ° was found to be - 40.19 kJ mol-1, indicating that inhibitor 3 became adsorbed via a mixed physi-chemisorption mechanism. A very high adsorption constant ( K a d s ) of 1.53 × 105 L mol-1 suggested strong adsorption of inhibitor 3. The difference in activation energy ( E a ) value of 42.4 kJ mol-1 between the control and the inhibited solution indicated an efficient adsorption of inhibitor 3. The ability of inhibitor 3 to retard both anodic and cathodic half-cell reactions was proved via open circuit potential and Tafel curves studies. Detailed discussions on the change in corrosion current densities ( i c o r r ), polarization ( R p ) and charge transfer ( R c t ) resistances have been offered to discuss the inhibition efficiency. Water contact angle measurement showed a drastic increase in mild steel surface hydrophobicity following inhibitor 3 adsorption. SEM-EDX and XPS studies confirmed the definitive presence of inhibitor 3 on the mild steel surface. Density functional theory (DFT) studies revealed the frontier molecular orbitals with which the metal surface interacts. A detailed corrosion inhibition mechanism has been offered in the context of adsorption isotherm and DFT studies.

Corrosion Inhibition of Dissymmetric Bis-Quaternary Ammonium with Imidazoline Ring on Q235 Steel in 1.0 Mol•l<sup>-1&Lt;/sup> Hydrochloric Acid Solution

Experimental and Theoretical Investigation of 1-Hexyl-3-methylimidazolium Iodide As a Corrosion Inhibitor for Mild Steel in HCl Environment

The inhibition performance of heterocyclic compounds on Q235 steel in methanol/formic acid medium: Experimental and theory

A New Imidazole Derivative for Corrosion Inhibition of Q235 Carbon Steel in an Acid Environment

Experimental and theoretical investigations of three Mannich-base imidazoline quaternary ammonium salts as efficient inhibitors for Q235 steel in sulfuric acid

Effect of imidazoline derivatives on the corrosion inhibition of Q235 steel in HCl medium: experimental and theoretical investigation

Molecular Dynamic Simulation on the Synergistic Corrosion Inhibition Effect and Mechanism of Quinoline Quaternary Ammonium Salt and L-Methionine

Experimental and theoretical investigations of a novel imidazoline quaternary ammonium salt as an effective inhibitor of Q235 steel in 1 M HCl

The synergistic inhibition effects of oleic imidazoline quaternary ammonium salt and sulfonate on Q235 steel corrosion in HCl media

Single and Double Alkyl Chain Quaternary Ammonium Salts as Environment-Friendly Corrosion Inhibitors for a Q235 Steel in 0.5 mol/L H2SO4 Solution

Study on Corrosion Inhibition Performance and Mechanism of Quinoline Quaternary Ammonium Salt and L-methionine on Pre-corrosion Q235 Steel

Synthesis of Gemini-type imidazoline quaternary ammonium salt using by-product fatty acid as corrosion inhibitor for Q235 steel

Insights into the corrosion resistance of a novel quinoline derivative on Q235 steel in acidizing medium under hydrodynamic condition: experimental and surface study

Synthesis of a new quaternary ammonium salt for efficient inhibition of mild steel corrosion in 15 % HCl: Experimental and theoretical studies

Synergistic corrosion inhibition effects of quaternary ammonium salt cationic surfactants and thiourea on Q235 steel in sulfuric acid: Experimental and theoretical research

An Eco-Friendly Quaternary Ammonium Salt as a Corrosion Inhibitor for Carbon Steel in 5 M HCl Solution: Theoretical and Experimental Investigation

The effect of pre-corrosion on corrosion inhibition performance and mechanism of quinoline quaternary ammonium salts

Inhibition effect of green Betaine type surfactants on Q235 steel in 1 mol·L−1 hydrochloric acid: The experimental and theoretical research

Synergistic effect of new imidazoline derivative and 2‐aminopyridine as corrosion inhibitors for Q235: Experimental and theoretical study

Study on the corrosion inhibition of biomass carbon quantum dot self- aggregation on Q235 steel in hydrochloric acid

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Corrosion Inhibition of Dissymmetric Bis-Quaternary Ammonium with Imidazoline Ring on Q235 Steel in 1.0 Mol•l&lt;sup&gt;-1&Lt;/sup&gt; Hydrochloric Acid Solution