Abstract:Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Nickel doped iron oxide was used as catalyst for the synthesis of carbon nanotubes (CNTs) and doping changed the morphology of carbon nanotube (CNTs). FTIR results confirmed the doping and presence of different functional groups. Chemical vapor deposition (CVD) was carried out for the synthesis of multiwall carbon nanotubes (MWCNTs) on nickel doped iron oxide catalyst for different percentage (1 %, 5 %, 10 % and 20 %) separately. CVD assembly was carried in tube furnace and the reaction was checked at two different temperature i.e 700 °C and 750 °C and using methane and compressed natural gas (CNG) as precursors. The catalyst was activated in the furnace at 800 °C for an hour. Methane and argon were used in proportion 2 : 1 inside the furnace. SEM showed formation of CNTs at 750 °C with CNG precursor. Formation of CNTs increased with increasing doping with this CNTs was confirmed by SEM.

Promoting effects of chromium on Ni/MgO catalysts for CNTs synthesis by chemical vapor deposition method

Methane Catalytic Cracking to Make Hydrogen and Graphitic Nano Carbons (nanotubes, Microfibers, Microballs, Onions) with Zero Emission

Catalytic Chemical Vapor Deposition of Methane to Carbon Nanotubes: Copper Promoted Effect of Ni/MgO Catalysts

Synthesis of Carbon Nanotubes by Catalytic Chemical Vapor Deposition over Methane Reduced Ni Catalyst

In Situ Carbon Nanotube Synthesis by the Reduction of NiO/γ-Al2O3 Catalyst in Methane

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Reinforcing hydrogen and carbon nanotube co-production via Cr–O–Ni catalyzed methane decomposition

In Situ Synthesis of Multiwalled Carbon Nanotubes over Lanio3 As Support of Cobalt Nanoclusters Catalyst for Catalytic Applications

Regulation of Ni-CNT Interaction on Mn-Promoted Nickel Nanocatalysts Supported on Oxygenated CNTs for CO2 Selective Hydrogenation.

Promotion of manganese on Fe-based catalyst for the production of carbon nanotubes (CNTs) from plastics

Synthesis of Thin-Walled Carbon Nanotubes from Methane by Changing the Ni/Mo Ratio in a Ni/Mo/MgO Catalyst

Improvement of Fe/MgO catalysts by calcination for the growth of single- and double-walled carbon nanotubes.

Simultaneous production of syngas and carbon nanotubes from CO2/CH4 mixture over high-performance NiMo/MgO catalyst

Effects of Ni Loadings on the Structure and Morphology of Carbon Nanotubes Using Nickel Doped Iron Oxide Catalysts

Fabrication of molybdenum carbide catalysts over multi-walled carbon nanotubes by carbothermal hydrogen reduction

Single wall carbon nanotubes growth over cobalt-iron mesoporous MCM-41 bimetallic catalyst under methane chemical vapor deposition, an experimental and DFT evaluation

Synthesis of Single-Walled Carbon Nanotubes with Narrow Diameter Distribution by Calcination of a Mo-Modified Fe/MgO Catalyst

Preparation of Nanosized Iron Catalyst and Small Diameter Carbon Nanotubes from Methane Decomposition

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

Stoichiometric‐Ratio‐Controlled Fe and Ni Non‐noble Metal Catalysts Supported on γ‐Al2O3 for Turquoise Hydrogen and Carbon Nanotubes Production

Synthesis of carbon nanotubes with Ni/CNTs catalyst