Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

Thermal Decomposition Kinetic Behavior of Emulsion Explosives

Thermal Decomposition Behavior of Emulsion Explosives Prepared by Multiple Emulsion

Kinetic Analysis of Thermal Decomposition Process of Emulsion Explosive Matrix in the Presence of Sulfide Ores

Thermal Decomposition Performances of RDX Mixed with Nickel Nitrate

Thermal stability evaluation of black powder, RDX, PETN and TNT

Research of Thermal Decomposition Kinetic Characteristic of Emulsion Explosive Base Containing Fe and Mn Elements

Non-isothermal Decomposition Kinetics, Heat Capacity and Thermal Safety of 37.2/44/16/2.2/0.2/0.4-Gap/cl-20/al/n-100/pca/auxiliaries Mixture.

Recent Advances in the Study of the Initiation of Energetic Materials Using the Characteristics of Their Thermal Decomposition Part Ii. Using Simple Differential Thermal Analysis

Thermal Behavior and. Decomposition Reactional Kinetic Studies on the Plastic Bonded Explosive of JO-8

Thermal Decomposition Kinetics and Spectral Analysis of Mixed Ester Propellants

Method to Determine the Kinetic Parameters of the Autocatalytic Decomposition Reaction and Critical Rate of Temperature Rise of Thermal Explosion of Energetic Materials from DSC Curves

Reactive Molecular Dynamics Simulation of Thermal Decomposition for Nano-Aluminized Explosives

Thermal Decomposition Kinetics of RDX with Distributed Activation Energy Model

Thermal Behavior and Decomposition Kinetics of Cl-20-Based Plastic-Bonded Explosives

A New Way to Estimate the Thermal Decomposition Mechanism Function and Thermal Safety of RDX

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

Thermal Performance and Decomposition Kinetics of RDX/AP/SiO2 Intermolecular Explosive

Study on Thermal Decomposition of RDX/AP Intermolecular Explosive

Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

Thermal decomposition and kinetics of electrically controlled solid propellant through thermogravimetric analysis

Mechanistic Investigation on the Initial Thermal Decomposition of Energetic Materials FOX-7 and RDX in the Crystal and Gas Phase: An MM/DFT-Based ONIOM Calculation.