Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

Thermal Behavior and. Decomposition Reactional Kinetic Studies on the Plastic Bonded Explosive of JO-8

Thermal Decomposition and Kinetics of Cast Plastic Bonded Explosives Based on NTO and HMX

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

Thermal stability evaluation of black powder, RDX, PETN and TNT

Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

Thermal decomposition mechanism of HMX/HTPB hybrid explosives studied by reactive molecular dynamics

Mechanistic Investigation on the Initial Thermal Decomposition of Energetic Materials FOX-7 and RDX in the Crystal and Gas Phase: An MM/DFT-Based ONIOM Calculation.

Numerical study of countermeasure against thermal stimuli for HMX-based polymer-bonded explosives

Thermal characterization of the promising energetic material TKX-50

Thermal Decomposition Kinetics of RDX with Distributed Activation Energy Model

Effects of Concentration and Temperature on Mechanical Properties of Tatb/Pctfe Pbx by Molecular Dynamics Simulation

Mechanism of Two Typical Binders BR and F 2604 on Thermal Decomposition of HMX

Multi-aspect and comprehensive atomic insight: the whole process of thermolysis of HMX/Poly-NIMMO-based plastic bonded explosive

Mechanical Properties and Thermal Decomposition Mechanism of Glycidyl Azide Polyol Energetic Thermoplastic Elastomer Binder with RDX Composite

Simulative Calculation of Mechanical Property, Binding Energy and Detonation Property of TATB/Fluorine-polymer PBX

Thermal decomposition and kinetics of electrically controlled solid propellant through thermogravimetric analysis

Kinetic Analysis of Thermal Decomposition Process of Emulsion Explosive Matrix in the Presence of Sulfide Ores

Studies on the thermal behavior and safety of a novel thermostable explosive BPTAP

Anisotropic Reaction Properties for Different HMX/HTPB Composites: A Theoretical Study of Shock Decomposition

Investigations on the Thermal Decomposition of JP-10/ Iso -Octane Binary Mixtures

TATB thermal decomposition: An improved kinetic model for explosive safety analysis