Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

Thermal Decomposition Behavior of Emulsion Explosives Prepared by Multiple Emulsion

Kinetic Analysis of Thermal Decomposition Process of Emulsion Explosive Matrix in the Presence of Sulfide Ores

Thermal Stability Evaluation of T152 Emulsifier on the Modification Influence of Fireworks Propellant

Thermal stability evaluation of black powder, RDX, PETN and TNT

Effect of emulsifiers on the thermal stability of firework propellants

Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

Thermal Decomposition and Kinetics of Cast Plastic Bonded Explosives Based on NTO and HMX

Thermal Characteristics of Energetic Polymers Based on Tetrahydrofuran and Oxetane Derivatives

Thermal decomposition and kinetics of electrically controlled solid propellant through thermogravimetric analysis

Thermal Decomposition Characteristics of Double-base Propellant and Multi-nitrate Ester Propellant

Thermal Decomposition Kinetics and Compatibility of 3,5-difluoro-2,4,6-trinitroanisole (DFTNAN)

Mechanistic Investigation on the Initial Thermal Decomposition of Energetic Materials FOX-7 and RDX in the Crystal and Gas Phase: An MM/DFT-Based ONIOM Calculation.

TATB thermal decomposition: An improved kinetic model for explosive safety analysis

Numerical study of countermeasure against thermal stimuli for HMX-based polymer-bonded explosives

Thermal Behaviors and Decomposition Mechanism of PNIMMO with CL-20

Investigation on the thermal decomposition of the elastomer containing fluoroolefin segment by DSC‐TG‐MS‐FTIR

Studies on the thermal behavior and safety of a novel thermostable explosive BPTAP

Study on the influence of moisture content on thermal stability of propellant.

Simulative Calculation of Mechanical Property, Binding Energy and Detonation Property of TATB/Fluorine-polymer PBX

Thermal Instability and Kinetics Analysis on Triacetone Triperoxide (TATP)