Abstract:In this study, a bench-scale fluidized bed combustor (FBC) was used to investigate the partitioning of nine heavy metals (Cd, Co, Cr, Cu, Mn, Ni, Pb, V, and Zn) and organic hazardous air pollutants, including aliphatics, monoaromatic compounds, cyclic hydrocarbons, and polycyclic aromatic hydrocarbons (PAHs), in the gas and solid phases of emissions from combustion of seven sewage sludge samples. The concentrations of heavy metals (HMs) in two main ash streams (bottom ash and fly ash) were detected by inductively coupled plasma−optical emission spectroscopy (ICP−OES). It showed that the concentration of zinc was the highest in bottom and fly ashes, ranging from 1600−1900 and 2200−2900 mg/kg, respectively. The average concentrations of HMs analyzed in both bottom ash and fly ash followed the order of Zn > Cu > Mn > Cr > Ni > Pb > V > Cd > Co. Co and Cu were mostly found in bottom ashes, while Pb and Zn were mostly found in fly ashes; other HMs were almost equally distributed between bottom and fly ashes. Organic pollutants [particularly hazardous air pollutants (HAPs)] in flue gas trapped onto the XAD resin and in fly ash were extracted with dichloromethane and analyzed using a gas chromatography−mass spectrometry (GC−MS) analyzer. The results showed that PAHs were more likely emitted in flue gas than in fly ash and the concentrations of PAHs in both flue gas and fly ash of sludge combustion were in a reasonably comparable range, with a maximum concentration reaching 0.03 mg/L. Aliphatics were mainly recovered from fly ashes (>70%), while monoaromatic compounds were found in both flue gases and fly ashes and cyclic hydrocarbons were undetectable for most of the sludge samples. The total amounts of HAPs in the flue gases increased most likely with the increasing H/C ratios of the sludge samples.

Enrichment of Heavy Metals and Organic Pollutants in Fly Ash Emitted from CFB During the Combustion of Coal Blended with Petroleum Coke

Characteristics Experimental of Fly Ash Release in Combustion Process of Blended Coal

Comparative Study on PM_(10) Microstructure and Heavy Metals Distribution in Emissions of Coal Combustion Sources

Study on the Respirable Particulate Matter Generated from the Petroleum Coke and Coal Mixed-Fired CFB Boiler

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Content and Distribution of Trace Elements and Polycyclic Aromatic Hydrocarbons in Fly Ash from a Coal-Fired CHP Plant

Distribution Of Polycyclic Aromatic Hydrocarbons In Fly Ash During Coal And Residual Char Combustion In A Pressurized Fluidized Bed

The Emissions of PAHs and Heavy Metals from Co-Combustion of Petrochemical Sludge with Coal in CFB Incinerator

Emission Control of Gaseous Pollutants from Co-Firing of Petroleum Coke and Coal in CFB

Characterization of fly ash and unburned carbon from CFB boiler with burning Fujian anthracite

Ash Aerosol Partitioning and Ash Deposition During the Combustion of Petroleum Coke/natural Gas Mixtures

Emission characteristics of heavy metals and their behavior during coking processes.

Research Of Fine Pm Pollution From The Cfb Coal Combustion

Experimental investigation on ash deposition of a bituminous coal during oxy-fuel combustion in a bench-scale fluidized bed

Fly Ash Deposition During Oxy-fuel Combustion in a Bench-Scale Fluidized-Bed Combustor

PAH (polycyclic Aromatic Hydrocarbon)Emission Characteristics of a Circulating Fluidized Bed Burning a Mixture of Petrochemical Sludge and Coal

Experimental Study on the Porous Structure of Variously Sized Fly Ash Particles under Different Combustion Conditions

Heavy metal characterization of circulating fluidized bed derived biomass ash.

Effects on Enrichment Characteristics of Trace Elements in Fly Ash by Adding Halide Salts into the Coal During CFB Combustion

Emission Characteristics of Heavy Metals and Organic Pollutants from the Combustion of Sewage Sludge in a Fluidized Bed Combustor

Physiochemical Characteristics and Formation Mechanism of Inhalable Particulate Matter in Coal Combustion Process