Abstract:A magnetorheological (MR) damper has been manufactured and tested and a non‐linear model is discussed. The parameters for the model are identified from an identification set of experimental data; these parameters are then used to reconstruct the force vs. displacement and the force vs. velocity hysteresis cycles of the MR damper for the hysteretic model. Then experiments are conducted on a three‐storey frame model using impact excitation, which identifies dynamic parameters of the model equipped with and without the MR damper. Natural frequencies, damping ratios and mode shapes, as well as structural properties, such as the mass, stiffness and damping matrices, are obtained. A semi‐active control method such as a variable structure controller is studied. Based on the ‘reaching law’ method, a feedback controller is presented. In order to evaluate the efficiency of the control system and the effect of earthquake ground motions, both numerical analysis and shaking table tests of the model, with and without the MR damper, have been carried out under three different ground motions: El Centro 1940, Taft 1952, and Ninghe 1976 (Tangshan Earthquake in Chinese). It is found from both the numerical analysis and the shaking table tests that the maximum accelerations and relative displacements for all floors are significantly reduced with the MR damper. A reasonable agreement between the results obtained from the numerical analysis and those from the shaking table tests is also observed. On the other hand, tests conducted at different earthquake excitations and various excitation levels demonstrate the ability of the MR damper to surpass the performance of a comparable passive system in a variety of situations. Copyright © 2003 John Wiley & Sons, Ltd.

Simulation analysis of MR damper Control over seismic responses of adjacent structures

Simulation Analysis on Intelligent Structures with Magnetorheological Dampers

Experiment and analysis of torsional seismic responses for asymmetric structures with semi-active control by MR dampers

Integrated Intelligent Control Analysis on Semi-Active Structures by Using Magnetorheological Dampers

Semi-Active Control of Structures Incorporated with Magnetorheological Dampers Using Neural Networks

Applacation of Magnetorheological Damper to Nonlinear Seismic Response Control of Adjacent Structures

New magnetorheological damper and its application in semi-active control of structural seismic response

Reliability-based stochastic control for structures using magnetorheological dampers

Intelligent Bi-State Control for the Structure with Magnetorheological Dampers

Experimental studies on nonlinear seismic control of a steel–concrete hybrid structure using MR dampers

Seismic Risk–Based Stochastic Optimal Control of Structures Using Magnetorheological Dampers

Experimental Study on Semi-Active Control of Frame-Shear Wall Eccentric Structure Using Mr Dampers

Design, Performance Test and Analysis on Magnetorheological Damper for Earthquake Mitigation

New Type Magnetorheological Damper And Its Application On Semi-Active Control Of Structural Seismic Response

Vibration control of seismic response of adjacent buildings coupled with semi-active MR dampers

Magnetorheological damper control and simulation analysis for vibration reduction of nonlinear structure based on AFSMC algorithm

Comparative Studies of Semiactive Control Strategies for MR Dampers: Pure Simulation and Real-Time Hybrid Tests

Experimental Study of the Semi‐active Control of Building Structures Using the Shaking Table

Seismic Structural Control Investigations Using a Prototype Magnetorheological Shear Damper

Experimental and Analytical Studies on Stochastic Seismic Response Control of Structures with Mr Dampers

Earthquake Disaster Mitigation by Using Magneto-Rheological Dampers