Abstract:Steel plate shear wall is usually in the form of a tube as the lateral force-resisting component in high-rise buildings. In addition to the connection between the column flange and beam section, the connection between the column web and beam section (i.e. the weak-axis connection) is also required. Therefore, the hysteretic behavior of uncoupled and coupled steel plate shear walls with this connection form was studied. Cyclic loading tests were carried out on two 1/3 scaled four-story specimens consisting of the uncoupled and coupled steel plate shear wall specimens (S4RN and C4RN). The test results show that the weak-axis connected form makes the column avoid premature out-of-plane deformation; the coupled specimen has better performance than the uncoupled specimen with a higher ductility of 4.31, and both specimens tend to a similar angle of 45 in the direction of the tension band; the coupling beam can effectively enhance the bearing capacity, improve the pinch of the hysteresis loop, and its rotation exhibits a similar tendency to that inter-story rotation while hitting the max of 0.07rad. A numerical method to simulate the behavior of S4RN and C4RN, and the submodel solution strategy to investigate the improvement of infill plates, are proposed and implemented using the ABAQUS. The specimens' shear distribution and partially slotted infill plate configuration were examined after the numerical modeling method was validated against the test results. The numerical results show that approximately 60% of the total lateral force can be shared by the infill plates, and the coupling beams can further reduce the lateral force resisted by the infill plates. The coupling beams can effectively reduce the overturning moment of each wall pier and adjust the axial pressure between the inner and outer column. The partially slotted CSPSW exhibits a plump spindle-shaped hysteretic curve with a great ductility of 5.88, so the measurement for replacing ordinary infill plates with partially slotted infill plates has a good application prospect.

Seismic Analysis of a Four-Story Two-Bay Thin Unstiffened Dual Steel Plate Shear Wall Structure

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

Analytical Model for Steel Frame-Reinforced Concrete Infill Slit Wall System

ELASTIC STABILITY OF STEEL PLATE SHEAR WALL WITH CROSS STIFFENERS IN SHEAR

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

Experimental and Numerical Study of Unstiffened Steel Plate Shear Wall Structures

Experimental Study on Seismic Behavior of Steel Plate Reinforced Concrete Composite Shear Walls with Square CFST Concealed Columns

Experimental study and FEM analysis on seismic behavior of a three-storied structural wall

Seismic Behavior of Steel Plate Reinforced Concrete Composite Shear Walls under Tension-Bending-Shear Combined Cyclic Load

Seismic behavior of multi-story structural walls under cyclic lateral loading: Experimental study

Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

Seismic Behavior of Cfst-Enhanced Steel Plate-Reinforced Concrete Shear Walls

Nonlinear Finite-Element Analysis of Double-Skin Steel-Concrete Composite Shear Wall Structures

Cyclic Behavior of Steel Tube-Double Steel Plate-Concrete Composite Walls

Analysis and Application of Double Steel Plate Concrete Composite Shear Wall in the R&D Building of Zhanjiang Bay Laboratory

Seismic behavior of prefabricated concrete filled steel tube-bordered monolayer reinforced shear wall

Experimental Study on Steel Plate Shear Walls with CFT Columns

Experimental Study on Seismic Behavior of Medium and High Shear-Span Ratio Composite Shear Wall with Double Steel Plates and Infill Concrete under High Axial Compression Ratio

Experimental Study on Seismic Performance of Mid-Rise Composite Shear Walls with CFT Columns and Embedded Steel Plate

Cyclic Tests and Performance of Weak-Axis Connected Uncoupled and Coupled Steel Plate Shear Wall with Novel Infill Plate Configuration