Abstract:This work reports new experimental data for the density and viscosity of n-decane + CO2 binary mixtures. A simultaneous density and viscosity measurement apparatus was redesigned using a vibrating–wire viscometer coupled with a vibrating–tube densimeter. The measurements for the pure component (n-decane) and three different binary mixtures (n-decane + CO2), with mole fractions of n-decane of (0.4026, 0.2225, 0.1262), were carried out at temperatures ranging from (303.15 to 373.15) K and pressures up to 80 MPa. The expanded relative uncertainties (k = 2, level of confidence = 0.95) were estimated to be 0.2% for density and 3.0% for viscosity over the entire measurement range, respectively. Densities were correlated as a function of temperature and pressure through a modified Tait–type equation with an average absolute percentage deviation less than 0.05%. To model the viscosity of the binary mixtures as a function of temperature, density, and composition, the extended hard–sphere method combined with simple quadratic mixing rules were used to describe our experimental data. Good agreement is found between experiments and correlations, which attests to the predictive capabilities of semi–empirical equations. In addition, Monte Carlo simulations in the isobaric-isothermal ensemble with the Transferable Potential for Phase Equilibria–United Atom (TraPPE–UA) force field were carried out to characterize the microscopic structure of the studied systems.

Measurements of viscosity and density of diethyl carbonate

Density and Viscosity Measurements of Diethyl Ether from 243 to 373 K and Up to 20 MPa

Density and viscosity measurements of diethylene glycol dimethyl ether

Viscosity and density measurements of diisopropyl ether and dibutyl ether at different temperatures and pressures

Isobaric Heat Capacity Measurements for Dimethyl Ether and 1,1-Difluoroethane in the Liquid Phase at Temperatures from 305 K to 365 K and Pressures Up to 5 Mpa

Density and Viscosity Measurements of Dimethoxymethane and 1,2-Dimethoxyethane from 243 K to 373 K up to 20 MPa

Density and Viscosity Measurements of 1-Dodecanol and 1,12-Dodecanediol at Temperatures of Up to 573.15 K and Pressures of Up to 10 MPa

Density and Viscosity Measurements of N-Dodecane and Carbon Dioxide + N-Dodecane at Temperatures from (298 to 548) K

Density and Viscosity Measurements of Diethyl Adipate from (303 to 373) K and up to 20 MPa

Surface tension of diethyl carbonate, 1,2-dimethoxyethane and diethyl adipate

Experimental Measurement and Modeling of the Viscosity of Dimethyl Ether

Measurement of saturated liquid density of dimethyl ether

Liquid Density of 2-Methoxyethyl Acetate, 2-Ethylhexyl Acetate, and Diethyl Succinate at Temperatures from 283.15 K to 363.15 K and Pressures Up to 100 Mpa

Simultaneous measurement of the density and viscosity for n-Decane + CO2 binary mixtures at temperature between (303.15 to 373.15) K and pressures up to 80 MPa

Measurement of the Critical Parameters and the Saturation Densities of Dimethyl Ether

Measurement and Correlation of Viscosities and Densities of Methyl Dodecanoate and Ethyl Dodecanoate at Elevated Pressures

Densities of Diethylene Glycol, Monobutyl Ether, Diethylene Glycol Dibutyl Ether, and Ethylene Glycol Monobutyl Ether from (283.15 to 363.15) K at Pressures Up to 60 MPa

Measurements and Correlations of Density, Viscosity, and Vapor Pressure for Methyl Ricinoleate

Density, Viscosity, And Vapor Pressure For Binary Mixtures Of Tricyclo [5.2.1.0(2.6)] Decane And Diethyl Carbonate

Density, Viscosity, and Vapor Pressure for Binary Mixtures of Tricyclo [5.2.1.0<sup>2.6</sup>] Decane and Diethyl Carbonate

Density, Viscosity, and Vapor Pressure for Binary Mixtures of Tricyclo [5.2.1.02.6] Decane and Diethyl Carbonate