Abstract:Biofuels are increasingly recognized as the most practical way to reduce carbon dioxide emissions and pollution in the transport industry. However, the production and promotion of biofuels have encountered many obstacles due to their complex composition and the ambiguity in studies on the physicochemical properties. To achieve a thorough comprehension of biofuel density and viscosity properties, developing suitable surrogate mixtures is an accurate and efficient method. N-Octane, ethylcyclohexane, and ethylbenzene are important components of biofuel surrogate mixtures to reflect the thermophysical properties of three primary hydrocarbons (alkanes, cycloalkanes, and alkylbenzenes). Therefore, the liquid density and viscosity of ternary mixtures (n-octane + ethylcyclohexane + ethylbenzene) are measured using a vibrating-tube densimeter and vibrating-wire viscometer, respectively, over the temperature range from 283.15 to 363.15 K and at pressures of up to 60 MPa. Moreover, the excess volume and viscosity deviations of the mixtures were obtained. For density, the group contribution (GC) PC-statistical associating fluid theory (PC-SAFT) equation of state (EoS) and SAFT-γ Mie EoS have been compared to assess the effect of different interaction potential functions on the prediction of liquid-phase densities. The results showed that the SAFT-γ Mie EoS gave the best prediction, followed by the GC PC-SAFT EoS. In terms of viscosity, a new mapping law for effective molecular weight has been developed to improve the predictive accuracy of the 1-cEHS model, and the absolute average deviations (AAD%) are 3.3–5%. In addition, excess molar volumes and viscosity deviations in this work are derived and discussed to further explore the influence of different molecular structures on thermophysical properties.

Measurement and Correlation of Viscosities and Densities of Methyl Dodecanoate and Ethyl Dodecanoate at Elevated Pressures

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Measurements and Correlations of Density, Viscosity, and Vapor Pressure for Methyl Ricinoleate

Measurement and Correlation of the Density, Viscosity and Vapor Pressure of Fatty Acid 2-Ethyhexyl Esters

Isobaric Heat Capacity Measurements for Dimethyl Ether and 1,1-Difluoroethane in the Liquid Phase at Temperatures from 305 K to 365 K and Pressures Up to 5 Mpa

Densities And Viscosities Of Exo-Tetrahydrodicyclopentadiene Plus N-Butanol And Exo-Tetrahydrodicyclopentadiene Plus N-Pentanol At Temperatures Of (293.15 To 313.15) K

Density, Viscosity, and Freezing Point for Four Binary Systems of N-Dodecane or Methylcyclohexane Mixed with 1-Heptanol or Cyclohexylmethanol

Measurement and Modeling of the Densities for Co2 + Dodecane System from 313.55 K to 353.55 K and Pressures Up to 18 Mpa

Experimental Measurements and Modeling of Density and Viscosity for Methyl Caprate + 1-Alkanol at Atmospheric Pressure and Different Temperatures

Densities and viscosities of binary mixtures of exo - tetrahydrodicyclopentadiene with N -undecane or N -tetradecane at T = (293.15 to 313.15) K

Densities and Viscosities for the Ternary Mixture of N-Undecane (1) + Methyl Decanoate (2) + N-Butanol (3) and Corresponding Binaries from T=293.15 to 333.15 K and at Atmospheric Pressure

Densities And Viscosities For The Ternary System Of Exo-Tetrahydrodicyclopentadiene (1) + Methylcyclohexane (2) + Cyclopropanemethanol (3) And Its Binaries At T=293.15 To 333.15 K

Simultaneous measurement of the density and viscosity for n-Decane + CO2 binary mixtures at temperature between (303.15 to 373.15) K and pressures up to 80 MPa

Density and Viscosity Measurements on the Ternary System of Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + Iso-Butanol (3) and Corresponding Binary Systems

Densities and Viscosities for the Ternary Mixtures of Exo-Tetrahydrodicyclopentadiene (1) + Isopropylcyclohexane (2) + Methyl Laurate (3) and Corresponding Binaries

Excess Molar Enthalpies of Dimethyl Carbonate and (butanol Isomers and 1-Pentanol) at T = (298.15, 313.15, and 328.15) K and P = (0.1, 1.0, and 10.0) MPa

Densities and Viscosities for the Ternary System of Cyclopropanemethanol (1) + n-Dodecane (2) + Butylcyclohexane (3) and Corresponding Binaries at T = 293.15–343.15 K

Densities, Viscosities, Refractive Indices, and Surface Tensions of Binary Mixtures of 2,2,4-Trimethylpentane with Several Alkylated Cyclohexanes from (293.15 to 343.15) K

Density, Viscosity and Spectroscopic Studies of the Binary System of Ethylene Glycol+dimethyl Sulfoxide at T=(298.15 to 323.15) K

Experimental and Modeling Investigations of Density and Viscosity for the Ternary ( N -Octane + Ethylcyclohexane + Ethylbenzene) Mixtures