Abstract:The flow condensation heat transfer coefficient of R134a inside two helical micro-fin tubes with outer diameter of 6.35 mm and helical angles of 18o and 28o respectively were experimentally studied at a high mass flux ranging from 500 to 1100 kg m−2 s−1. The condensation temperatures are 35°C, 40°C and 45°C, and the vapor qualities ranges from 0.95 to 1.00 at the inlet section and from 0.00 to 0.05 at the outlet section. Experimental results show that there are annular and intermittent flow regimes inside the tube under experimental conditions, the ratio of annular flow region to the total heat transfer region is about 70%. The liquid film flow changes from rotational flow to coexistence of rotational and horizontal flows when the vapor quality is 0.475±0.08, 0.486±0.06 and 0.521±0.05, respectively and the corresponding saturation temperature is 35°C, 40°C and 45°C. Based on the experimental data, the heat transfer coefficient increases with increasing mass flux and fin helical angle, and with decreasing saturation temperature and Reynolds number of cooling water. In addition, the heat transfer coefficient of annular flow is greater than that of intermittent flow, in other words, the heat transfer coefficient increases with increasing vapor quality. The heat transfer coefficient obtained at high mass flux was compared with the calculated data of some published correlations used at low mass flux. It was found that most correlations underestimate the experimental heat transfer coefficient inside the micro-fin tube, and these prediction deviation increases with increasing mass flux and fin helical angle. By introducing some dimensionless numbers as well as considering the flow mechanism of liquid film inside the tube, two heat transfer coefficient correlations were proposed based on the experimental data. The ratio of liquid film thickness to fin height was used to characterize whether the liquid film flow is rotational flow or coexistence of rotational and horizontal flows in the proposed correlation, which shows a better prediction accuracy with a mean deviation of less than 7.3%.

EXPERIMENTAL INVESTIGATIONS OF CONVECTION HEAT TRANSFER IN MICROPOROUS MEDIA

Flow Characteristics And Convection Heat Transfer In Microporous Media

Experimental Investigation of Fluid Flow and Internal Convection Heat Transfer in Mini/Micro Porous Media

Internal heat transfer coefficients in microporous media with rarefaction effects

Natural convection heat transfer in concentric annuli with nanofluids

Experimental And Numerical Investigations Of Air Flow Characteristics Through Microporous Media

Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials

Particle-to-fluid heat transfer coefficients in miniporous media

Numerical simulation of fluid flow in microporous media

Theoretical and Experimental Study of the Thermal Conductivity of Nanoporous Media

Experimental investigations of gas flow characteristics through microporous media

Experimental Study on the Convective Heat Transfer of Cuo-Water Nanofluid in A Turbulent Flow

Consideration of Heat Transfer Enhancement Mechanism Using Nano- and Micro-Scale Porous Layer

Experimental and Numerical Investigation of Forced Convection Heat Transfer of Air in Non-Sintered Porous Media

Consideration of Heat Transfer Enhancement Mechanism of Nano- and Micro-Scale Porous Layer Via Flow Visualization

Experimental Study On Convection Heat Transfer Of Nanocolloidal Dispersion In A Turbulent Flow

Numerical Research on Convective Heat Transfer and Resistance Characteristics of Turbulent Duct Flow Containing Nanorod-Based Nanofluids

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Experimental investigation of convection heat transfer in mini-fin structures and sintered porous

Experimental and numerical study of mixed convection heat transfer in a vented cavity partially filled with a porous medium: Effects of reynolds and rayleigh numbers on Nusselt number and flow regimes

Experimental study of nanofluids natural convection heat transfer in various shape pores of porous media