Abstract:Porous materials are used as pneumatic components in a wide range of industrial applications. Such porous materials contain thousands of interconnected irregular micro-pores that produce a large pressure drop (Delta P) between the upstream and downstream sides of the porous material when a fluid flows through it. The relationship between the pressure drop and flow rate (i.e., the Delta P-G characteristic) and the relationship between flow resistance (gamma) and flow rate (the gamma - G characteristic) are two very important basic characteristics. One factor affecting them is temperature, whose variation changes the viscosity and density of the fluid. In this study, we experimentally and theoretically analyzed the effect of temperature on Delta P - G and flow resistance characteristics of porous materials by heating them under constant electric heating power. The resulting experimental Delta P - G and flow resistance curves shift upward relative to their counterparts at room temperature owing to the increase in fluid temperature, but remain within the adiabatic and room temperature curves. The temperature-effect ratio eta at constant heating power increases from 1.3 to 1.7 as the flow rate decreases from 21.53 x 10(-5) kg/s to 5.80 x 10(-5) kg/s, indicating that Delta P - G and flow resistance characteristics and pumping power change significantly when a porous material is heated. Furthermore, temperature distributions were obtained numerically to gain deeper understanding of the temperature effect. The effects of heating power values, characteristic porous material coefficients, and average fluid density on Delta P - G and flow resistance characteristics were also investigated. (C) 2016 Elsevier Ltd. All rights reserved.

Experimental Investigation of Fluid Flow and Internal Convection Heat Transfer in Mini/Micro Porous Media

Flow Characteristics And Convection Heat Transfer In Microporous Media

Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials

Theoretical and Experimental Investigation of Flow Rate Characteristics of Sintered Metal Porous Media

An Experiment-Based Comparative Investigation of Correlations for Microtube Gas Flow

EXPERIMENTAL INVESTIGATIONS OF CONVECTION HEAT TRANSFER IN MICROPOROUS MEDIA

Experimental investigations of gas flow characteristics through microporous media

Experimental And Numerical Investigations Of Air Flow Characteristics Through Microporous Media

Study of Pressure Drop-Flow Rate and Flow Resistance Characteristics of Heated Porous Materials under Local Thermal Non-Equilibrium Conditions

Measurement and Determination of Friction Characteristic of Air Flow Through Porous Media

Internal heat transfer coefficients in microporous media with rarefaction effects

Experimental Investigation of Convection Heat Transfer in Mini-Fin Structures and Sintered Porous Media

Particle-to-fluid heat transfer coefficients in miniporous media

Experimental investigation of convection heat transfer in mini-fin structures and sintered porous

Consideration of Heat Transfer Enhancement Mechanism of Nano- and Micro-Scale Porous Layer Via Flow Visualization

Experimental Investigation Of Convection Heat Transfer In Mini-Fin Structures

Numerical simulation of fluid flow in microporous media

Transitional And Turbulent Convective Heat Transfer Of Compressible Gas Flows Through Microtubes

Experimental Investigation of Convection Heat Transfer of CO2 at Super-Critical Pressures in Vertical Mini-Tubes and in Porous Media

Experimental and Numerical Investigation of Forced Convection Heat Transfer of Air in Non-Sintered Porous Media

Experimental study on flow characteristics of gas transport in micro- and nanoscale pores