Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

An approximate method to acoustic radiation problems :element radiation superposition method

Prediction and Experiment for Near-Field Sound Radiation of Cylindrical Shells

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Application of Acoustic Transfer Vector Algorithm on Acoustic Radiation for Drive Axle of Automobile

The Fast Prediction of Sound Radiation from Typical Submarine Cabin Based on Acoustic Transfer Vector

A Boundary Element Method for Acoustic Problems in Relative Motion Between Source and Fluid

Comparative Study of Surface Integral Methods in Aeroacoustic Prediction

An Improved Boundary Element Method for Predicting Half-Space Scattered Noise Combined with Permeable Boundaries

Accelerated Method for Predicting Acoustic Far Field and Acoustic Power of Rotating Source

A Wave Superposition–Finite Element Method for Calculating the Radiated Noise Generated by Volumetric Targets in Shallow Water

A Modified Infinite Element Method for Acoustic Radiation

Virtual Boundary Method for Solving Acoustic Problems of Open Structure

Structural–acoustic Sensitivity Analysis of Radiated Sound Power Using a Finite Element/ Discontinuous Fast Multipole Boundary Element Scheme

Array Radiation Sound Field Calculation and Beam-Synthesis Based on Wave Superposition Method

Application of the modified infinite element method to two-dimensional transient acoustic radiation

Aeroacoustic prediction for cooling fan using convolution quadrature boundary element method

An acoustic-wave preserved artificial compressibility method for low-Mach-number aeroacoustic simulations

A Method to Compute the Radiated Sound Power Based on Mapped Acoustic Radiation Modes.

The formulations based on the indirect boundary element method for the acoustic characterization of an arbitrarily shaped source in a bounded noisy environment

Analysis of acoustic radiation problems involving arbitrary immersed media interfaces by the extended finite element method with Dirichlet to Neumann boundary condition

Acoustic analysis of damping structure with response surface method