Abstract:The failure process of biomimetic hybrid design composite composed of layers of conch shell and pearl shell was studied through quasi-static three-point bending experiments and numerical simulations. The biomimetic conch shell structure with inclined angles serves as the upper layer of the hybrid structure, while the biomimetic pearl shell structure with traditional brick and mud structure serves as the lower layer of the hybrid structure, forming a hybrid design structure. Four inclined angles were designed for the structural units of the conch shell, namely 15°, 30°, 45°, and 60°. Twenty-four specimens (six specimens for each inclined angle) were prepared using 3D printing technology using both soft and hard matrix materials . The influence of different inclined angles on the fracture strength, fracture toughness , and energy absorption of hybrid design structures was experimentally studied. The biomimetic hybrid design composite specimen with a notch is placed between two supporting rollers, and a loading indenter acts at mid-span. All twenty-four specimens were notched with a triangular tip and a rectangular bottom. A loading rate of 1 mm/min is used to avoid the viscoelastic effect of the composite materials. Details of the specimens, the experimental set-up and procedure are discussed in this paper. Complementary to the experimental studies, an extensive numerical investigation was carried out to study the influence of the aspect ratio of brick and mud units on the fracture initiation and failure of hybrid design structures. The causes of crack initiation and propagation, and failure modes in biomimetic hybrid design structures were postulated. These numerical findings help in reinforcing the experimental results and provide crucial information to enhance further research in this exciting area.

Mechanical properties of staggered-alignment biomimetic composites

Study on Biomimetic Staggered Composite for Better Thermal Shock Resistance

The Coefficient of Thermal Expansion of Biomimetic Composites

Studies on effect of failure modes on mechanical properties of staggered composites

Thermal-Elastic Behaviors Of Staggered Composites

Couple Effect of Surface Energy and Strain Gradient on the Mechanical Behaviors of the Biological Staggered Composites

Poisson ratio can play a crucial role in mechanical properties of biocomposites

Mechanical Properties of Unidirectional Nanocomposites with Non-Uniformly or Randomly Staggered Platelet Distribution

Biomimetic Staggered Composites with Highly Enhanced Energy Dissipation: Design, Modeling, and Test

On strength and toughness of soft staggered composites

Fast stress wave attenuation in bioinspired composites with distributed soft particles modulating hard matrices

Study on strengthening and toughening Al/CFRP hybrid composites with biomimetic interface

Mechanical behavior of bio-inspired crossed-lamellar microstructures for achieving high-performance composites

An experimental and numerical study of sutural composites with shear stiffening gel core

A General Property-Structure Relationship from Crack Stability Analysis on Hybrid Staggered Composites with Elasto-Plastic Matrices

Stiffness and Toughness of Soft/stiff Suture Joints in Biological Composites

Flow Stress of Biomorphous Metal–matrix Composites

Performance of 3D printing biomimetic conch shell and pearl shell hybrid design composites under quasi-static three-point bending load

Design of bimetallic interpenetrating biomimetic structures and additive-casting synergetic manufacturing

Unraveling Crack Stability and Strain Localization in Staggered Composites by Fracture Analysis on the Shear-Lag Model

A multiscale analytical framework for mode I crack in staggered composites