Abstract:The Poisson's ratio and elastic modulus are two parameters determining the elastic behavior of biomaterials. While the effects of elastic modulus on the cell response is widely studied, very little is known regarding the effects of the Poisson's ratio. The micro-architecture of meta-biomaterials determines not only the Poisson's ratio but also several other parameters that also influence cell response, such as porosity, pore size, and effective elastic modulus. It is, therefore, very challenging to isolate the effects of the Poisson's ratio from those of other micro-architectural parameters. Here, we computationally design meta-biomaterials with controlled Poisson's ratios, ranging between -0.74 and +0.74, while maintaining consistent porosity, pore size, and effective elastic modulus. The 3D meta-biomaterials were additively manufactured at the micro-scale using two-photon polymerization (2PP), and were mechanically evaluated at the meso-scale. The response of murine preosteoblasts to these meta-biomaterials was then studied using in vitro cell culture models. Meta-biomaterials with positive Poisson's ratios resulted in higher metabolic activity than those with negative values. The cells could attach and infiltrate all meta-biomaterials from the bottom to the top, fully covering the scaffolds after 17 days of culture. Interestingly, the meta-biomaterials exhibited different cell-induced deformations ( e.g., shrinkage or local bending) as observed via scanning electron microscopy. The outcomes of osteogenic differentiation ( i.e., Runx2 immunofluorescent staining) and matrix mineralization ( i.e., Alizarin red staining) assays indicated the significant potential impact of these meta-biomaterials in the field of bone tissue engineering, paving the way for the development of advanced bone meta-implants. Statement of Significance : We studied the influence of Poisson's ratio on bone cell response in meta-biomaterials. While elastic modulus effects are well-studied, the impact of Poisson's ratio, especially negative values found in architected biomaterials, remains largely unexplored. The complexity arises from intertwined micro-architectural parameters, such as porosity and elastic modulus, making it challenging to isolate the Poisson's ratio. To tackle this, this study employed rational computational design to craft meta-biomaterials with controlled Poisson's ratios, alongside consistent effective elastic modulus, porosity, and pore size. The study reveals that two-photon polymerized 3D meta-biomaterials with positive ratios displayed higher metabolic activity, and cell growth than those with negative values. The outcomes pave the way for the development of advanced 3D bone tissue models and meta-implant.

Poisson ratio can play a crucial role in mechanical properties of biocomposites

Poisson's ratio of collagen fibrils measured by small angle X-ray scattering of strained bovine pericardium

Atomistic Insights on the Rheological Property of Polycaprolactone Composites with the Addition of Graphene

Estimating mechanical properties of bi-continuous two-phase composites for optimised multi-functionality

Mechanical properties of staggered-alignment biomimetic composites

The Coefficient of Thermal Expansion of Biomimetic Composites

Bone cell response to additively manufactured 3D micro-architectures with controlled Poisson's ratio: auxetic vs. non-auxetic meta-biomaterials

Couple Effect of Surface Energy and Strain Gradient on the Mechanical Behaviors of the Biological Staggered Composites

Controllable Three-Dimension Auxetic Structure Design Strategies Based on Triply Periodic Minimal Surfaces and Dual Period Deformation Function

Evaluation of the parallel coupling constitutive model for biomaterials using a fully coupled network-matrix model

Slight compressibility and sensitivity to changes in Poisson's ratio

Strain stiffening universality in composite hydrogels and soft tissues

Stiffness and Toughness of Soft/stiff Suture Joints in Biological Composites

Current poisson's ratio values of finite element models are too low to consider soft tissues nearly-incompressible: illustration on the human heel region

Composite patch with Negative Poisson's Ratio mimicking cardiac mechanical properties: Design, experiment and simulation

Optimization of damping properties of staggered composites through microstructure design

A Mechanics Model of Soft Network Materials With Periodic Lattices of Arbitrarily Shaped Filamentary Microstructures for Tunable Poisson's Ratios

Nano-structured interpenetrating composites with enhanced Young's modulus and desired Poisson's ratio

Studies on effect of failure modes on mechanical properties of staggered composites

Effect of printing path on compressive properties of 3D printed continuous fiber composite negative Poisson's ratio structure

Optimizing Mechanical Properties of Bio-Inspired Composites Through Functionally Graded Matrix and Microstructure Design