Abstract:<p>A three‐dimensional model was developed for an air‐breathing micro direct methanol fuel cell (μDMFC) with an extended anode catalyst region on the cell channels. The model was evaluated against experimental studies for a μDMFC under several anode distribution conditions, and the results showed a close agreement. The model was employed to study if catalysts coated on the fluid‐flow channel walls could enhance the power generation performance. Further, the effects of the anode catalyst loading of channel walls on the overall cell and individual electrode performances were examined. The modeling results indicated that the fuel cell with anodes both on the proton‐exchange membrane and on channel walls did not show superior performance to the fuel cell with anode catalysts only on the membrane since the overall power generation was mainly limited by the kinetics of the methanol electrode reaction but not the methanol transfer. The modeling results also demonstrated that increasing the anode catalyst loading on channel walls decreased the cathode potential due to an increase in the ohmic loss for the fuel cell with anode catalysts both on the membrane and on channel walls. Reducing channel dimensions decreased the ionic resistance and increased the methanol concentration at the anode and the methanol crossover flux to the cathode.</p>

A model investigation of the performance of a novel anode flow-field structure with microblocks for micro direct methanol fuel cells

Investigation Of Mass Transport And Cell Performance On Mu Dmfc With Different Anode Flow Fields

Design, Fabrication and Testing of an Air-Breathing Micro Direct Methanol Fuel Cell with Compound Anode Flow Field

Design, Optimization and Microfabrication of a Micro-Direct Methanol Fuel Cell with Microblocks in Anode Structure

Study of anode modeling for passive μDMFC

Design and Simulation of Air-Breathing Micro Direct Methanol Fuel Cells with Different Anode Flow Fields.

Experimental Investigations of Anode Structure on the Performance of Air-Breathing Μdmfc

Experimental Investigations of the Anode Flow Field of A Micro Direct Methanol Fuel Cell

Numerical Simulations in a Three-dimensional Model of Direct Methanol Fuel Cell Anode Using Computational Fluid Dynamics Method

A Silicon-Based Micro Direct Methanol Fuel Cell with Microblocks in Anode Structure

The Effects of Different Flow Channels on Silicon-based Micro Direct Methanol Fuel Cells

Modeling study of an air‐breathing micro direct methanol fuel cell with an extended anode catalyst region

Investigation of Μdmfc (micro Direct Methanol Fuel Cell) with Self-Adaptive Flow Rate

Investigation Of Corner Effect On Micro-Scale Flow Of Mu Dmfc

The Effect of Different Flow Patterns on Anode Fluid Behaviors of Micro Direct Methanol Fuel Cells

Anode Flow Field Structures of Micro Direct Methanol Fuel Cell

Experimental investigation of CO2 bubbles behavior in the anode flow fields of Micro Direct Methanol Fuel Cells

A Tapered Serpentine Flow Field for the Anode of Micro Direct Methanol Fuel Cells

Performance Research of a Silicon-Based Micro Direct Methanol Fuel Cell

Numerical Simulation of μDMFC Performance

Three-dimensional Two-Phase Mass Transport Model for Direct Methanol Fuel Cells