Abstract:The effect of diluents on polymer crystallization and membrane morphology via thermally induced phase separation(TIPS) were studied by changing the composition of the mixed-diluents systematically, in the system of poly(4-methyl-1-pentene) (TPX)/dibutyl-phthalate (DBP)/di-n-octyl-phthalate (D-n-OP) with TPX concentration of 30 wt %. The TPX crystallization was observed with differential scanning calorimetry (DSC) and wide angle Xray diffraction (WAXD). The membranes were characterized with scanning electron microscopy (SEM), porosity, and pore size measurement. As the content of D-n-OP increased in n-mixed-diluents, the solubility with TPX increased, inducing the phase separation changing from liquid-liquid phase separation into solid-liquid phase separation, which changed the membrane morphology and structure. When the ratios of DBP to D-n-OP were 10 : 0, 7: 3; 5 : 5, and 3: 7, membranes were formed with cellular structure and well connected pores, while the ratio was 0 : 10, discernable spherulities were found with not well-formed pore structure. The effect of composition of the mixed-diluents on membrane morphology was more remarkable in TPX/dioctyl-sebacate (DOS)/dimethyl-phthalate (DMP) system, since good cellular structure was formed when the ratios of DOS to DMP were 10 : 0, 7 : 3, while spherulites were observed when 5: 5. Dual endotherm peaks behavior on DSC melting curves emerged for all the samples in this study, which was attributed to the special polymer crystallization behavior, primary crystallization, and secondary crystallization occurred when quenching the samples. As the content of D-n-OP increased, the secondary crystallization enhanced which induced the first endotherm peak on DSC melting curves moving to a lower temperature and the broadening of the overall melting peak, as well as the increasing of the overall crystallinity. (c) 2008 Wiley Periodicals, Inc.

Effect of Diluents on Crystallization of Poly(Vinylidene Fluoride) and Phase Separated Structure in A Ternary System Via Thermally Induced Phase Separation

Preparation of Porous PVDF Membrane Via Thermally Induced Phase Separation with Diluent Mixture of DBP and DEHP

Effects of Crystallization Temperature of Poly(vinylidene Fluoride) on Crystal Modification and Phase Transition of Poly(butylene Adipate) in Their Blends: a Novel Approach for Polymorphic Control.

Nonisothermal Crystallization Kinetics of Poly(vinylidene Fluoride) in a Poly(vinylidene Fluoride)/dibutyl Phthalate/di(2‐ethylhexyl)phthalate System Via Thermally Induced Phase Separation

Polymorphic Crystallization And Phase Transition Of Poly(Butylene Adipate) In Its Miscible Crystalline/Crystalline Blend With Poly(Vinylidene Fluoride)

Membrane formation of poly(vinylidene fluoride)/poly(methyl methacrylate)/diluents via thermally induced phase separation

Non-Isothermal Crystallization Behavior of Poly(vinylidene Fluoride) in Dialkyl Phthalate Diluents During Thermally Induced Phase Separation Process

Crystallization behavior of PVDF in PVDF-DMP system via thermally induced phase separation

Effect of diluents on the crystallization behavior of poly(4-methyl-1-pentene) and membrane morphology via thermally induced phase separation

Morphology and crystallization behavior of poly(vinylidene fluoride)/poly(methyl methacrylate)/methyl salicylate, and benzophenone systems via thermally induced phase separation

Thermally Induced Phase Separation of Poly(vinylidene Fluoride)/diluent Systems: Optical Microscope and Infrared Spectroscopy Studies

Control the Interplay of Crystallization and Phase Separation of Conjugated Polymer Blends by the Relative Rate of Nucleation and Growth

Morphologies and crystalline forms of polyvinylidene fluoride membranes prepared in different diluents by thermally induced phase separation

Poly(vinylidene fluoride) Crystallization Behavior and Membrane Structure Formation Via Thermally Induced Phase Separation with Benzophenone Diluent

Formation of a Bicontinuous Structure Membrane of Polyvinylidene Fluoride in Diphenyl Carbonate Diluent Via Thermally Induced Phase Separation

Effects of diluent content on the crystallization behavior and morphology of polyethylene membrane fabricated via thermally induced phase separation process

Completely miscible ternary blends—III. Poly(vinylidenefluoride)-poly(methyl methacrylate)-poly(vinyl acetate)

Nonisothermal Crystallization Kinetics of Poly(Vinylidene Fluoride) in A Poly(Vinylidene Fluoride)/Poly(Methyl Methacrylate)/Dipropylene Glycol Dibenzoate System Via Thermally Induced Phase Separation

Formation of Poly(vinylidene Fluoride) (PVDF) Membranes Via Thermally Induced Phase Separation

Morphology and Formation Mechanism of Poly(Vinylidene Fluoride) Membranes Prepared with Immerse Precipitation: Effect of Dissolving Temperature

Effect of Coagulation Bath Temperature on Formation Mechanism of Poly(vinylidene Fluoride) Membrane