Abstract:It is quite straightforward to generate and acquire ultrasonic guided waves in metallic or composite structures to investigate structural defects; however, the interpretation and evaluation of the reflected/transmitted signal to extract useful information is a challenging task. This is primarily due to the dispersion and multimodal behavior of Lamb waves, which are dependent on the frequency of the excitation wave and the thickness of the material under investigation. These multimodal and dispersive behaviours lead to a complex waveform structure, and therefore require an advanced signal processing technique to decipher useful information in the time and/or frequency domains. For this purpose, due to its desirable mathematical properties, the Wigner–Ville distribution (WVD) is considered to be a powerful tool for generating time–frequency (TF) spectra and estimating the temporal and spectral features of this type of complex signal. However, due to its quadratic nature, undesirable cross-terms and spurious energies are also generated, which limit the readability and the interpretation of the spectrum. To suppress this effect, this paper describes the use of an autoregressive model based upon Burg's maximum entropy method to modify the kernel of the discrete WVD. This technique was applied to ultrasonic Lamb wave signals obtained using various numerical and experimental configurations to extract the useful discriminatory spectral and temporal information required for the mode identification, localization, and quantification of structural damage. When used for damage localization, the proposed method precisely estimated the distance between two closely spaced notches in a metallic plate from different simulated noisy signals with a maximum uncertainty of 5%, based upon an excellent TF energy distribution. Moreover, the energy concentration (EC) of the TF energy distribution, in combination with the variation of its instantaneous frequency (IF) curve, was also effective in identifying the overlapping modes of the Lamb wave signal. Finally, for damage quantification, three TF-based damage indices, namely EC, TF flux, and IF, were extracted from five sets of specimens using the proposed TF scheme and used to train the regression model. Model testing proved that the damage indices have the potential to predict crack sizes precisely and reliably.

Diagnostics of Damage Presence Using Tomographically Constructed Probability Distribution Based on Lamb Wave Signals

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Damage assessment using the Lamb wave factorization method

Detection and localization of closely distributed damages via lamb wave sparse reconstruction

Damage Detection Method Based on Continuous Wavelet Transformation of Lamb Wave Signals

Damage Identification Method Based on Ultrasonic Guided Wave Sensor Network and Path Optimization Bayesian Fusion Algorithm

Lamb Wave-Based Damage Localization and Quantification in Composites Using Probabilistic Imaging Algorithm and Statistical Method

Nondestructive Testing Method Based on Lamb Waves for Localization and Extent of Damage

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Quantitative Damage Estimation Method Based On Lamb Waves For Transverse Damage In Composite Laminates

Damage Detection of Composite Plates by Lamb Wave Ultrasonic Tomography with a Sparse Hexagonal Network Using Damage Progression Trends

Experimental Study of Structural Damage Identification Based on Modal Parameters and Decay Ratio of Acceleration Signals

Lamb Wave Probabilistic Damage Identification Based on the Exchanging-Element Time-Reversal Method

Damage Imaging Identification of Honeycomb Sandwich Structures Based on Lamb Waves

Application of Damage Detection of Metal Structure Lamb Wave Modal Superposition Imaging Based on Scanning Laser Vibration Measurement

A Damage Localization Method With Multimodal Lamb Wave Based on Adaptive Polynomial Chirplet Transform

An advanced Wigner–Ville time–frequency analysis of Lamb wave signals based upon an autoregressive model for efficient damage inspection

Damage assessment in composite laminates with the Lamb wave factorization method

Lamb-Wave-Based Multistage Damage Detection Method Using an Active PZT Sensor Network for Large Structures.

Characterization of Damage Size in Metallic Plates Using Lamb Waves

Modified minimum variance imaging of Lamb waves for damage localization in aluminum plates and composite laminates