Abstract:Preparation of Nd(Fe,Mo)12NX∕α-Fe nanocomposite magnets by the strip casting technique and subsequent mechanical alloying method are investigated. The result shows that the cooling rate of NdFe11Mo1 starting materials has great effects on the magnetic properties of the final Nd(Fe,Mo)12NX∕α-Fe nanocomposite magnets, and the rapid solidification is helpful for improving magnetic properties. The nanocomposite magnets starting from strip have a Br of 65emu∕g, an iHc of 8372Oe, and a (BH)max of 7.3MGOe, which is better than those of the corresponding materials starting from the conventional ingots. x-ray diffraction and scanning electron microscopy observations for the strips and the ingots show that not only the strip have much more 1:12 main phase and lower Fe-rich phase but also the distribution of 1:12 phase and Fe-rich phase in the strips are more uniform. The strips with the uniform microstructure are not only found to improve the efficiency of the high energy ball milling but also avoid the presence of excessive α-Fe nuclei. High resolution transmission electron microscopy observations show that the mechanically alloyed powders starting from the strips also have more homogeneous microstructure. In the end, the exchange coupling interactions are studied by the ratio of remanence coercivity Hr to the intrinsic coercivity Hc (Hr∕Hc). The Hr∕Hc of the nanocomposite magnets is found to be 1.25, while that of single phase Nd(Fe,Mo)12NX material is about 1.0. This shows that there exists strong exchange spring effect between the hard phase Nd(Fe,Mo)12NX and soft phase α-Fe.

Effect of ingot preparation technique on magnetic properties of NdFeB magnets

Influence of Cu and Gd on Thermal Stability and Magnetic Properties of Nd(DyAl)FeB Magnets

Effects of Chilling-Roll Materials and Ambient Pressure on the Microstructure and Magnetic Properties of Nanocomposite Nd2fe14b/Alpha-Fe Magnets

On the Cooling Rate of Strip Cast Ingots for Sintered NdFeB Magnets

Influence of Hot-Pressing on Sintered Nd-Fe-B Permanent Magnets

Obvious Difference in Fracture Strength and Magnetic Properties by Strip Casting Thickness of NdFeB

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Strip Casting Technique Modification for Sintered NdFeB

Effect of Nd Content on Magnetic Properties and Microstructure of Nd_xFe_(90.5-x)Zr_(3.0)B_(6.5_)Nanocomposite Magnets with the Big Zr Content

Influence of Cladless Hot Isostatic Pressing on Magnetic Properties and Corrosion Resistance of Sintered NdFeB Magnets

Effect of Microstructure Before Nitrogenation on Magnetic Properties of SmFeN Alloys

The effect of powder shape on the magnetic anisotropy in NdFeB bonded magnets

Effect of microstructure on magnetic properties of Nd-Fe-B permanent magnet

Fabrication of Low-Cost Nd–Fe–B Sintered Magnets Reusing Ultrafine Powders

Preparation of Anisotropic Nd(Fe,Mo)(12)N-X Magnetic Materials by the Strip-Casting Technique

Effect of Nd-Co on microstructure and magnetic properties of Nd-Ce-Y-Fe-B sintered magnets

Effects of melt-spinning equipments on microstructure and magnetic properties of Nd2Fe14B/α-Fe alloys

Effects of Ag on the Magnetic and Mechanical Properties of Sintered NdFeB Permanent Magnets

Effects of Alignment on the Magnetic and Mechanical Properties of Sintered Nd–Fe–B Magnets

High Performance Rare Earth Nd-Fe-B Bonded Magnets

Improvement of overall texture and magnetic properties in bulk hot-deformed Nd-Fe-B composite magnets by the design of macrostructure