Abstract:For applicability in the field of semiconductor, it is important that the thermal expansion coefficient of heat sink materials approximates to those of semiconductor chip and peripheral material. In addition, high thermal conductivity and densification also is required. Mo/Cu composites are desirable for thermal management applications because of its combination of low thermal expansion coefficient and high thermal conductivity. In this paper, Mo/Cu composites with volume fractions of 55% ∼ 67% Mo content have been fabricated by the cost-effective squeeze-casting technology. The microstructures and thermo-physical properties of the Mo/Cu composites were investigated. The experimental results showed that: (1) the full densities of the Mo/Cu composites were achieved and the microstructures of the Mo/Cu composites were homogenous compound structures of adhesive phase Cu linking Mo grains. (2) The mean linear coefficients of thermal expansion (20 °C ∼ 100°C) of Mo/Cu composites ranged from 7.9 to 9.3 × 10-6/ °C and decreased with an increase in volume fraction of Mo content. The experimental coefficients of thermal expansion agreed well with predicted values based on Kerner's model. (3) Their thermal conductivities were increased with the increasing of volume fraction of Cu content and as high as 220-270 W/(m·°C). This was attributed to the fact that the full densities and high purity of Mo/Cu composites were achieved through the cost-effective squeeze-casting technology processes. As a result, the properties of the Mo/Cu composites are good enough to satisfy electronic packaging applications.

The Thermal and Electric Conduction Properties of High Dense TiB2P/Cu Composites Fabricated by Squeeze Casting Technology

Fabrication and thermo-physical properties of TiB2p/Cu composites for electronic packaging applications

Densification behavior, mechanical and electrical properties of in-situ TiB 2p /Cu composite powder via vacuum hot pressing

Highly Dense Mo/Cu Composites Fabricated by Squeeze Casting and Their Thermal Conduction Properties

Microstructure and thermal and electric conductivities of high dense Mo/Cu composites

Property characteristics of a TiB2P/Al composite fabricated by squeeze casting technology

Microstructure and Thermoelectric Properties of B4C+TiB2 Composite by Hot Pressed Sintering

The thermo-physical properties of high dense Mo/Cu composites fabricated by squeeze casting technology

TiB2P/Al composite fabricated by squeeze casting technology

Ambient mechanical properties of TiB2P/Al composites by squeeze casting

Thermal Expansion and Mechanical Properties of High Reinforcement Content Sicp/Cu Composites Fabricated by Squeeze Casting Technology

Microstructure and Performance of Solidified TiB2TiC Composites Prepared by High Pressure and High Temperature

Fabrication and characterization of high dense Mo/Cu composites for electronic packaging applications

Self-Propagating High-Temperature Synthesis, Microstructure and Mechanical Properties of Tic-Tib2-Cu Composites

Microstructure and mechanical properties of TiB2-40 wt% TiC composites: Effects of adding a low-temperature hold prior to sintering at high temperatures

Thermophysical Properties of TiCp/W Composites

Microstructure And Properties Of Tib2p/Al Composites Fabricated By Squeeze Casting Technology

Microstructure evolution and mechanical properties of TiB2/Cu composites processed by equal channel angular pressing at elevated temperature

Fabrication and thermal expansion properties of high dense Mo/Cu composites

Thermal Expansion Properties of SiCp/Cu Composites in Electronic Packaging Applications

Fabrication and Properties of SiC/Cu Composites for Electronic Packaging