Abstract:Volts/Hz controlled industrial adjustable speed drives of induction motor can often experience the slow speed dynamic response caused by voltage drop of stator resistance and undesirable sustained oscillations. The paper presents a novel flux oriented V/f closed control to deal with the problems above. The proposed control scheme is based on the constant V/f method and the stator flux linkage oriented control concept. The scheme fully compensates the voltage drop of stator resistance using d-axis and q-axis dynamic currents which helps to keep a constant steady-state flux in d axis regardless of the operation change in motor speed or load. To suppress oscillation a new oscillation compensation method is added to the closed V/f control method. The presented work also carried out the theoretical stability analysis and analyzed principle of design proper feedback parameters under the proposed scheme using the Small-signal Model method. The simulation and experimental results based on a 10kW IM drive systems are presented which confirm that the proposed scheme have a good transient response and nearly none oscillations in in a wide operation range.

A Novel V/F Control System Based on Stator Voltage Oriented Method

Novel stator voltage oriented V/F control method capable of high performance at low speed

Decoupled Vector Control Scheme for Dual-Armature Flux-Switching Permanent Magnet Machines

A Novel Stator Voltage Oriented V/F Control Method Capable of High Output Torque at Low Speed

A Novel Low Speed Performance Improvement Method of V/F Controlled Induction Motor Drive System

Research of V/f Control Method for Multiphase Induction Motor with Non-sinusoidal Supply at Low Speed

A Novel Stator Flux Oriented V/f Control Method in Sensorless Induction Motor Drives for Accuracy Improvement and Oscillation Suppression

A Novel Flux Oriented V/F Control Method Of Induction Motor Based Industrial Adjustable Speed Drives

Novel stability improvement method for V/F controlled induction motor drive systems

Very Low Speed Performance Research of Novel Voltage Vector Control Method for IM

A Novel Stability Improvement Method for V/F Controlled Induction Motor Drive Systems

A Novel Stator Frequency Control Method of DFIG-DC System Based on Regulating Air Gap Flux Vector

Stability Improvement of V/F Controlled Induction Motor Driver Systems Based on Reactive Current Compensation

Research on Torque Boost Method Based on Stator Voltage Vector Oriented Control

A Vibration Mitigation Approach for Inverter-fed Permanent Magnet Motor Drive System

A Novel Complex Vector Decoupling Control Method of IPMSM with Fuzzy Strategy

A V/Hz Based Maximum Torque Per Volt Control in Flux-Weakening Region for Interior Permanent Magnet Synchronous Motors

A novel control strategy for vibration reduction in the permanent magnet motor drive system with eccentric load

Sensorless control and start-up strategy of permanent magnet synchronous motor

Stator Voltage Oriented Variable-parameter Control Strategy for Wind Turbine Driven Doubly Fed Induction Generator

Vector Control System of Induction Motor Based on Feed-Forward Decoupling Scheme