Abstract:A pneumatic parallel platform driven by an air cylinder and three circumambient pneumatic muscles was considered. Firstly, a mathematical model of the pneumatic servo system was developed for the MIMO nonlinear model-based controller designed. The pneumatic muscles were controlled by three proportional position valves, and the air cylinder was controlled by a proportional pressure valve. As the forward kinematics of this structure had no analytical solution, the control strategy should be designed in joint space. A cross-coupling integral adaptive robust controller (CCIARC) which combined cross-coupling control strategy and traditional adaptive robust control (ARC) theory was developed by back-stepping method to accomplish trajectory tracking control of the parallel platform. The cross-coupling part of the controller stabilized the length error in joint space as well as the synchronization error, and the adaptive robust control part attenuated the adverse effects of modelling error and disturbance. The force character of the pneumatic muscles was difficult to model precisely, so the on-line recursive least square estimation (RLSE) method was employed to modify the model compensation. The projector mapping method was used to condition the RLSE algorithm to bound the parameters estimated. An integral feedback part was added to the traditional robust function to reduce the negative influence of the slow time-varying characteristic of pneumatic muscles and enhance the ability of trajectory tracking. The stability of the controller designed was proved through Laypunov’s theory. Various contrast controllers were designed to testify the newly designed components of the CCIARC. Extensive experiments were conducted to illustrate the performance of the controller.

Study on Feed Forward and Feedback Hybrid Control for High-Tech Platform

Study on feed forward-feedback compound control for hightech platform

Compensator of the Disturbance Force for the Trajectory Tracking of Hydraulic 6-DOF Parallel Platform

Multi-Degree-of-Freedom Hybrid Control System for High Technology Facilities

Dynamic Modeling and Robust Control in Task Space of 4-DOF Parallel Electric Platform with 4TPS-1PS Structure

Cross-coupling Integral Adaptive Robust Posture Control of a Pneumatic Parallel Platform

Precision control of piezoelectric actuator using support vector regression nonlinear model and neural networks

Levelling Control of an Electro-pneumatic Stabilized Platform Driven by Pneumatic Muscles

Synchronous Tracking Control for Hydraulic Stewart Platform Based on Combination Tracking Errors in Operation Workspace

Simulation Analysis of Multi DOF Platform Control in High Precision Plant Based on Actuator Models

Six Degree-Of-Freedom Microvibration Hybrid Control System for High Technology Facilities

Performance Enhancement Of Pneumatic Vibration Isolators Using Self-Tuning Pid Feedback And Time-Delay-Control (Tdc)-Based Feedforward Scheme

Design of an Active Vibration Isolation Control Strategy Based on IFT Method

The hybrid control for the double-direction decoupling platform interacting with the structure

Simulation Of Multi-Closed Loop Control With Feed Forward Control Of Micro-Vibration Isolation Platform

Hybrid Vibration Control for Structure and Device Platform under Environment Excitation

Active Pneumatic Vibration Control By Using Pressure And Velocity Measurements And Adaptive Fuzzy Sliding-Mode Controller

Positioning and Vibration Control of a Magnetostrictive-Actuated Stewart Platform with Hysteresis Compensation

Hybrid Control of a Parallel Platform Based on Pneumatic Artificial Muscles Combining Sliding Mode Controller and Adaptive Fuzzy CMAC

Hybrid Control of Microvibration of High-Tech Facility under Horizontal and Vertical Ground Motion

Simulate Research on High Precise Electro-hydraulic System Adjusted by Hybrid Fuzzy Controller