Abstract:The application of high-strength steels in marine engineering is gaining importance because of their high performance and ability to help save resources. However, detailed and systematic information about the corrosion behavior of high-strength steels in different marine corrosion zones is still limited. This study aimed to investigate and compare the corrosion behavior of AISI 4135 high-strength steel in marine atmospheric, splash, tidal, and immersion zones, focusing on rust layer characteristics, corrosion form and electrochemical corrosion behavior. Corrosion exposure experiments were performed in a specific sea area, and the recovered steel samples were characterized by Raman spectroscopy, confocal laser scanning microscopy, nitrogen adsorption analysis, etc. Results showed that the rust layer formed on the surface of the steel in all corrosion zones had component delamination. The steel samples in the atmospheric, splash, and tidal zones were characterized by pitting corrosion, where the average depths of the corrosion pits were 56.1 ± 4.7 μm, 199.5 ± 12.6 μm, 108.1 ± 11.0 μm, respectively, whereas those in the immersion zone were characterized by general corrosion. Meanwhile, electrochemical tests were performed on the electrode samples during exposure. Results showed that the corrosion of the steel progressed from slow to fast in the atmospheric, splash, and tidal zones, whereas it was relatively steady in the immersion zone. Differentiated models of the corrosion evolution of steel under wet-dry cycle and immersion conditions were presented. This discrepancy is related to the varying degrees of accumulation of ionic corrosion products at the metal/oxide interface, which are determined by the mean pore access diameter of the rust layer and the corrosion environment. This study is highly significant for the design of marine engineering considering the safety applications of high-strength steel structures in harsh marine environments.

A Simplified Maximum Pit Depth Model of Mild and Low Alloy Steels in Marine Immersion Environments

Pitting corrosion model of mild and low-alloy steel in marine environment-Part 1: Maximum pit depth

Pitting corrosion model of mild and low-alloy steel in marine environment-Part 2: The shape of corrosion pits

Generalized hysteretic constitutive model of marine structural steel with pitting corrosion

Model for Wastage Allowance and Strength Properties of Pipe Piles Exposed to Marine Corrosion

Microscopic investigation on pitting corrosion of Ni-Cr-Mo-V high-strength steel weldment in simulated deep-sea environment

Study on corrosion behavior and mechanism of AISI 4135 steel in marine environments based on field exposure experiment

A Probabilistic Model For Corrosion Prediction Of Steel Reinforcement

Depth-varying corrosion characteristics and stability bearing capacity of steel pipe piles under aggressive marine environment

Pitting Morphologies and Characteristics of Low-Alloy Steel With and Without Plastic Deformation in Industrial and Non-industrial Marine Splash Zones

Predicting corrosion for life estimation of ocean and coastal steel infrastructure

Probabilistic constitutive model for corroded structural steel with stochastic pits under monotonic tension

Probabilistic Approach for Durability Design of Concrete Structures in Marine Environments

The development of a mechanistic-chemometrics model with multi-degree of freedom for pitting corrosion of HP-13Cr stainless steel under extremely oilfield environments

A life prediction model for P110S steel in deep-well environments with H 2 S/CO 2 coexistence based on multi-factor chemometric drive

Uniaxial behaviour and corrosion-welding-based constitutive model of marine structural steel

Morphological characteristics and geometric prediction model of pits in complex corrosion environment

Research on the Pitting Mechanism of Dispersion-Strengthened High-Strength Steel under Wet-Dry Cycling in a Marine Environment

Three-dimensional Computational Simulation of Corrosion Pit Growth Morphology

Corrosion fatigue life prediction model for 10CrNiCu shipbuilding steel under authentic marine environments

Localized corrosion: Passive film breakdown vs. Pit growth stability, Part VI: Pit dissolution kinetics of different alloys and a model for pitting and repassivation potentials