Abstract:This paper investigates the three-dimensional crack propagation and damage evolution process of metallic column shells under internal explosive loading. The calibration of four typical failure parameters for 40CrMnSiB steel was conducted through experiments and subsequently applied to simulations. The numerical simulation results employing the four failure criteria were compared with the differences and similarities observed in freeze-recovery tests and ultra-high-speed tests. This analysis addressed the critical issue of determining failure criteria for the fracture of a metal shell under internal explosive loads. Building upon this foundation, the damage parameter D c , linked to the cumulative crack density, was defined based on the evolution characteristics of a substantial number of cracks. The relationship between the damage parameter and crack velocity over time was established, and the influence of the internal central pressure on the damage parameter and crack velocity was investigated. Variations in the fracture modes were found under different failure criteria, with the principal strain failure criterion proving to be the most effective for simulating 3D crack propagation in a pure shear fracture mode. Through statistical analysis of the shell penetration fracture radius data, it was determined that the fracture radius remained essentially constant during the crack evolution process and could be considered a constant. The propagation velocity of axial cracks ranged between 5300 m/s and 12600 m/s, surpassing the Rayleigh wave velocity of the shell material and decreasing linearly with time. The increase in shell damage exhibited an initial rapid phase, followed by deceleration, demonstrating accelerated damage during the propagation stage of the blast wave and decelerated damage after the arrival of the rarefaction wave. This study provides an effective approach for investigating crack propagation and damage evolution. The derived crack propagation and damage evolution law serves as a valuable reference for the development of crack velocity theory and the construction of shell damage evolution modes.

Research on Crack Growth Orientations of Double-base Solid Propellant

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

Numerical simulation of crack propagation in solid propellant with extrinsic cohesive zone model

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

A nonlinear viscoelastic constitutive model with damage and experimental validation for composite solid propellant

Research progress in dynamic mechanical behavior of solid propellants

Structural Integrity Assessment of a Solid Propellant Grain Considering Confining Pressure Effect

A Nonlinear Viscoelastic Constitutive Model for Solid Propellant with Rate-Dependent Cumulative Damage

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

Research on the statistical damage constitutive model for composite solid propellant

Numerical Simulation on the Interface Debonding in Solid Propellant under Large Deformation by a Cohesive Zone Model

Crack propagation velocity and fracture toughness of hydroxyl-terminated polybutadiene propellants with consideration of a thermo-viscoelastic constitutive model: Experimental and numerical study

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

A constitutive model of solid propellants considering aging and confinement pressure

Fracture Behavior of B2 Phase Matrix of Ti2AlNb-based Alloy with Microcracks of Different Orientations

Crack Straining-Based Spall Model

Investigation of the Thermal Field on Solid Propellant Grain with Cracks by Moving Particle Semi‐Implicit Method

NEPE Propellant Mesoscopic Modeling and Damage Mechanism Study Based on Inversion Algorithm

Crack propagation and damage evolution of metallic cylindrical shells under internal explosive loading

Experimental Research on Tensile Mechanical Properties of NEPE Propellant under Confining Pressure