Flow regime evolution mechanism and falling flux prediction model for bypass injection of viscous liquid in vertical T-junction
Wenqiang Lou,Zhiyuan Wang,Jianbo Zhang,Hui Liu,Baojiang Sun,Feifei Zhang
DOI: https://doi.org/10.1016/j.cej.2023.146601
IF: 15.1
2023-10-15
Chemical Engineering Journal
Abstract:The gas–liquid two-phase flow in T-junction serves as a fundamental theoretical foundation for studying mass and heat transfer laws in industrial applications, including oil and gas resource development and material mixing in the chemical industry. We designed a T-junction pipeline consisting of a vertical gas flow pipe and a horizontal liquid injection pipe and conducted experiments to investigate gas–liquid two-phase flow with liquid bypass injection. The experimental results indicate that there are two critical states for the downward flow of liquid at the injection point at different gas velocities: Critical Downward Flow(CDF) and All Downward Flow(ADF). Based on liquid falling state and response law of falling flux, the liquid falling conditions were categorized into three regions: region without liquid falling (flux ratio = 0), region of all liquid falling (flux ratio = 1) and transition region(flux ratio from 0 to 1). Through analyzing the dynamic characteristics of gas–liquid two-phase flow at the connection point and considering the zero shear stress state of the pipe wall and flow pattern transition, a CDF criterion for the liquid was established. The flooding state of gas–liquid countercurrent was used as the limit condition for ADF, and a criterion for ADF was developed based on experimental data. Under varying liquid viscosity conditions, compared with experimental data, the error of the CDF criterion model is less than 5 %, and the error of ADF criterion model is less than 15 %. A liquid falling flux prediction model was established based on the two extreme states of liquid falling, and its accuracy was verified through experimental results, challenging the existing theoretical criterion of liquid falling flux ratio being limited to "either 0 or 1".
engineering, chemical, environmental