Abstract:To reveal energy absorption mechanism and improve crashworthiness of aluminum (Al)/carbon fiber reinforced plastic (CFRP) hybrid front rails. Firstly, the dynamic axial impact tests of net aluminum rails and Al/CFRP hybrid rails with carbon fiber sheets embedded into aluminum hollow were carried out, the experimental results show that the energy absorption ( \begin{document}$ {W_{\text{e}}} $\end{document} ) and special energy absorption ( \begin{document}$ {W_{\text{s}}} $\end{document} ) of AL/CFRP hybrid rail were improved by 46.1% and 17.5% compared to the net aluminum rail. Next, the material model MAT54 was adopted to build the finite element model (FEM) in commercial software LS-DYNA and validated by the experimental data. The FEM was used to reveal the mechanism of improvement in energy absorption and the damage mode of the hybrid rail. The result indicates that the \begin{document}$ {W_{\text{e}}} $\end{document} of aluminum tube and CFRP laminate in hybrid rail is improved by 30.7% and 43.4% compared to the net corresponding constituent, respectively, and the friction dissipation energy of hybrid rail is improved by 217.8% than that of the sum of single components. Further, a theoretical model is adopted to predict the mean crushing force ( \begin{document}$ {P_{\text{c}}} $\end{document} ) generated by the aluminum tube, interactive effect and the overall hybrid rail, and the theoretical results are in good agreement with the numerical results and experimental results. Finally, parametric studies of aluminum wall thickness, CFRP laminate thickness and CFRP laminate stacking sequence on the crashworthiness were conducted by the FEM, and results show that the energy absorption and peak crushing force of hybrid rails increased with the increase into the aluminum thickness and CFRP thickness.

Impacting experiment and numerical simulation of energy-absorbing component of vehicles

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

The design of crashworthy subway vehicle and crash research of whole car-body

Energy Absorption Design Study of Subway Vehicles Based on a Scaled Equivalent Model Test

Numerical Simulation Study on the Inertia-sensitiveness of Energy-absorbing Structures under Impact Loading

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation

Simulation of Crashworthiness and Structure Improvement of Automotive Body in Offset Impact

Crashworthy Energy Absorbing Car-body Design Method for Pass enger Train

Computational Simulation and Test Study of an Extendable and Retractable Automobile Crash Energy Absorbing Device

Research On The Crashworthy Structures Of Subway Vehicles

Axial Impact Energy Absorption Characteristics of the Aluminum/ Carbon Fiber Reinforced Plastic Hybrid Front Rail

Test and numerical simulation of SUV bumper under action of impact load

Full Frontal Impact Virtual Proving Ground and Body Energy Analysis

Crash performance and multi-objective optimization of a gradual energy-absorbing structure for subway vehicles

Improvement of energy-absorbing structures of a commercial vehicle for crashworthiness using finite element method

Numerical Simulation and Structural Improvement for the Crashworthiness Capacity of M1 Type Commercial Vehicle

Simulation Analysis of Inner Force Characteristics of Car Body Thin-walled Beam Structures Subject to Lateral Impact

Study on the Design and Simulation of a New Energy Absorbing Structure

The Simulation and Improvement of Automotive Body Crash Performance with Finite Element Method

Passenger Car-Body Crashworthiness Based on the Force Transmission Path of Frontal Impact

Design of Straight-Retractable Energy-Absorbing Beam for Electric Cars and Its Crashworthiness Analysis