Abstract:To further enhance the crashworthiness of subway vehicle anti-climb energy-absorbing devices, this paper proposes a novel collapsible structure, which is embedded with honeycomb aluminum blocks and consists of an inner and outer double-layer square tube. An impact finite element model of the subway vehicle’s anti-climb energy-absorbing device was established using LS-DYNA (v.17.2). The effects of the connecting diaphragm thickness, the inner and outer tube thicknesses of the thin-walled tubes, and the yield strength of the honeycomb aluminum on the energy absorption and impact force of the anti-climb energy-absorbing device were investigated. The results indicate that changes in the inner and outer tube thicknesses of the thin-walled tubes significantly affect the energy absorption and impact force of the anti-climb energy-absorbing device. However, changes in the connecting diaphragm thickness only increase the maximum energy absorption by up to 7.5% but have a significant impact on the maximum peak force. It was also found that the difference in energy absorption due to changes in the yield strength of the honeycomb aluminum is only 3.6%, suggesting that the yield strength of the honeycomb aluminum and the connecting diaphragm thickness have a limited influence on the crashworthiness design of the anti-climb energy-absorbing device. Furthermore, a multi-objective surrogate model characterizing the specific energy absorption and maximum peak force was established for the aforementioned four influential parameters using the response surface method. The model was then optimized using a genetic algorithm, resulting in optimal parameters that increased the energy absorption and specific energy absorption by 27.3% and 13.8%, respectively, compared to the original values, leading to a significant improvement in crashworthiness. The findings provide valuable references for and insights into the crashworthiness design and optimization of subway vehicles’ anti-climb energy-absorbing devices.

Computational Simulation and Test Study of an Extendable and Retractable Automobile Crash Energy Absorbing Device

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation

Frontal crashworthiness structure analysis and optimization of electric vehicle

Design of Straight-Retractable Energy-Absorbing Beam for Electric Cars and Its Crashworthiness Analysis

Simulation of Automobile Offset Frontal Impact and Structure Improvement

Body Structure Optimization of a Car in the Frontal Crash

Effect of rear-seat submarine on dummy injury and it’s optimization

Study of the factors influencing load displacement curve of energy absorbing device by area division simulation

Finite Element Analysis on the Lateral Crashworthiness of Car Body Structure

Development of a Runaway Vehicle Protective Barrier System Using Simulation and Full-Scale Crash Testing

Numerical simulation of crashworthiness parameters for design optimization of an automotive crash-box

Application of Sub-Structure Method for Automotive Side Impact Simulations

Investigating the crash-box-structure's ability to absorb energy

Improvement of vehicle crashworthiness for full frontal impact based on energy flow analysis

Numerical Simulation and Test Validation of Vehicle Frontal Crash

A Design of Side Impact Sled Test

Static and dynamic axial crushing analysis of car frontal impact hybrid absorbers

Research and Analysis of Frontal Collision of Passenger Cars Based on ANSYS

Energy Absorption Characteristics and Parameter Optimization of Anti-Climb Energy-Absorbing Devices for Subway Vehicles under Impact Loads

Modeling and Simulation of Frontal Crash Performance of a Minibus

Design of a Conceptual Bumper Energy Absorber Coupling Pedestrian Safety and Low-Speed Impact Requirements