Abstract:As a new forming method, the liquid-infiltration-extrusion process has become one of the most important methods for forming discontinuously fiber or particle reinforced composites developed in recent years. This forming process combines the merits of the liquid metal infiltration and semi-solid extrusion. However, the simulation is complicated as the forming process involving the solidification under pressure and large deformation. The process is simulated based on the coupled thermal-mechanical rigid-viscoplastic FEM against the typical problems in the process simulation in this paper. The distribution for the stress, strain, extrusion velocity and temperature in the forming processes were gained from the simulation. In addition, the effects of process parameters such as die preheating, pouring temperature, infiltration time and forming speed on deformation process were investigated. It was concluded that the friction coefficient, die semi-angle and initial process parameters were the most primary variables which affect the deformation process. Long pressure-keeping time, large friction coefficient and small forming die semi-angle all can lead to great deformation force. The numerical simulation results have a good agreement with their experimental ones. Hence, the process parameters can be selected rationally to improve the quality of forming products based on the results.

Dynamic System Modeling of the Liquid-solid Extrusion Process of Forming Aluminum Composites

Simulation of liquid infiltration and semi-solid extrusion for composite tubes by quasi-coupling thermal-mechanical finite element method

Numerical Simulation of Liquid-Solid Extrusion Process Based on the Mechanical Model Coupled with Solidification

Fuzzy Neural Network Modeling of Liquid-Solid Extrusion Process for Composite Products

Research on the Numerical Simulation of Liquid-Infiltration-extrusion Process for Composites Based on the Rigid-Viscoplastic FEM

FEM ANALYSIS ON THE TEMPERATURE FIELDDURING COMPOSITE TUBE LIQUID-SOLIDEXTRUSION FORMING PROCESS

Thermal-Mechanical Coupled Analysis Of The Liquid Infiltration-Extrusion Process For Composites

Optimization Design for Process Parameters of Liquid-Solid Extrusion to Prepare Composites

Modeling and Simulation of Fiber Reinforced Polymer Mold Filling Process by Level Set Method

Investigation of forming optimization of composite tubes based on liquid impact forming

FEM and FVM Compound Numerical Simulation of Aluminum Extrusion Processes

Nonlinear Heat Transfer Analysis of Die During Liquid-Solid Extruding Composites Considering Preheating and Its Experimental Verification

Investigation on the Numerical Simulation for the Dynamic Transition from Liquid to Solid During Liquid-Solid Extruding Forming

Study on Effect of Extrusion Velocity on Composites Liquid-Solid Extrusion Process Using 3D Thermo-Mechanical Simulation

FEM Dynamic Simulation on the Heat Transfer of the Deformed Body During Semi-Solid Extrusion

Modeling of Transverse Welds Formation During Liquid–solid Extrusion Directly Following Vacuum Infiltration of Magnesium Matrix Composite

An Effective Simulation Method for Aluminum Profile Extrusion Process

3D FE Analysis on the Product Defects of Composites Formed by Liquid–solid Extrusion Process

Study on Process Parameters of Liquid–Solid Infiltration Extrusion of Continuous Carbon Fiber-Reinforced Aluminum Matrix Composites

Phase Field Method for the Assessment of the New-Old Billet Material Interaction during Continuous Extrusion Using COMSOL Multiphysics

Switch Controll System of Liquid Infiltration and Extrusion Process of Composites