Abstract:Warpage, volumetric shrinkage, and residual stress are three important indexes for the characterization of the overall quality of composite parts in the short fiber-reinforced composite injection molding process. In addition to process parameters, fiber parameters have an important influence on part quality. In this study, the product warpage, volumetric shrinkage and residual stress are considered as the quality objectives. The design parameters include fiber content, fiber aspect ratio, melt temperature, injection pressure and cooling time. The combined Taguchi, response surface methodology and NSGA-II approach is proposed to optimize the fiber-reinforced composite injection molding process. A case study of a part is presented. On the basis of orthogonal experiment design, Moldflow software is applied in the short fiber-reinforced composite injection molding process. The importance of various parameters on the influence of three quality objectives is researched by the analysis of variance (ANOVA). A combination of parameter settings is determined by the signal-to-noise ratio (S/N). Three response surface models are created on the basis of the simulation results to map the complex nonlinear relationship between design parameters and quality objectives. Based on the response surface model, the relationship between fiber parameters and quality objectives are further discussed. The nondominated sorting genetic algorithm II (NSGA-II) is interfaced with the predictive models to find the optimum design parameter values. The results show that the hybrid method of response surface method (RSM) and NSGA-II is an effective method to solve the multi-objective optimization problem for the quality optimization of fiber-reinforced composite injection molding.

Optimization Design for Process Parameters of Liquid-Solid Extrusion to Prepare Composites

Design and Implementation of an Optimum System for Forming Parameters of Liquid-solid Extrusion Process

Optimization Approach for Processing Design in the Extrusion Process of Plastic Profile with Metal Insert

Neural Network Modeling and Optimization of Semi-Solid Extrusion for Aluminum Matrix Composites

Multilevel Optimization Method of Laminated Composite Plates Based on Collaborative Design of Material & Structure Parameters

Design Optimization of Molds for Autoclave Process of Composite Manufacturing

Dynamic System Modeling of the Liquid-solid Extrusion Process of Forming Aluminum Composites

Design Optimization for Filament Wound Cylindrical Composite Internal Pressure Vessels Considering Process-Induced Residual Stresses

Optimizing Parameters of Semi-Solid-State-Extrusion Process by Genetic Algorithm

Multi-objective Optimization of the Fiber-Reinforced Composite Injection Molding Process Using Taguchi Method, RSM, and NSGA-II

Multi-objective optimization of process parameters for biological 3D printing composite forming based on SNR and grey correlation degree

Study on Process Parameters of Liquid–Solid Infiltration Extrusion of Continuous Carbon Fiber-Reinforced Aluminum Matrix Composites

Parameter Optimization and Precision Control of Water-Soluble Support Cores for Hollow Composite Castings Fabricated by Slurry Microextrusion Direct Forming Method

Research on the Numerical Simulation of Liquid-Infiltration-extrusion Process for Composites Based on the Rigid-Viscoplastic FEM

Optimization of composite extrusion process parameters of soybean protein and fish

Joint Multi-objective Optimization Design of Structural and Process Parameters in Besides-star Wheel Hot Extrusion Die

Multi Objective Optimization of Processing Parameters in FDM based on Entropy-weight TOPSIS Model

Forming process of back upright column outer board and multi-objective optimization

Optimization Of The Flow Distribution In Extrusion Die Of Plastic Profile

Optimization Design Method of Extrusion Die for Complex Profile

Fuzzy Neural Network Modeling of Liquid-Solid Extrusion Process for Composite Products