Abstract:This paper investigates the performance of active noise control (ANC) systems with two reflecting surfaces that are placed vertically on ground in parallel. It employs the modal expansion method and the boundary element method to calculate the noise reduction of the systems with infinitely large and finite size reflecting surfaces, respectively. Both experimental and simulation results show that the noise reduction of the system can be significantly increased after optimizing the surface separation distance and their locations with the sound sources. It is found that the sound radiation of the primary source can be completely reduced in principle if the surface interval is less than half the wavelength and the source line is perpendicular to the surfaces for infinitely large reflecting surfaces. Even with finite size ones, the noise reduction performance improvement is still significant compared with those without any reflecting surfaces. For example, for an ANC system with a source distance of 0.074 m, experiments achieve an improvement of 8.6 dB at 800 Hz where two 0.2 m × 0.2 m parallel reflecting surfaces are placed with a distance of 0.15 m around the system on ground. The mechanisms for the performance improvement are discussed.

Performance of an Active Control System Near a Reflecting Surface

Effect of reflecting surfaces on the performance of active noise control

Performance of a Multichannel Active Sound Radiation Control System Near a Reflecting Surface

A Method of Sound Field Control Using Beam Deflection

A Numerical Study on Active Noise Radiation Control Systems Between Two Parallel Reflecting Surfaces

Effect Of A Reflecting Surface On The Global Power Reduction Performance Of Multichannel Anc Systems

Increasing the Performance of Active Noise Control Systems on Ground with Two Vertical Reflecting Surfaces with an Included Angle

Numerical Study of Active Shock Control for Transonic Aerodynamics

Active Control on the Scattered Radiation by a Rigid Surface

Progress of research on active noise radiation control with reflecting surfaces

Increasing the Performance of Active Noise Control Systems on Ground with a Finite Size Vertical Reflecting Surface

A compound secondary source for active noise radiation control

Active Control of Radiation from a Piston Set in a Rigid Sphere.

Near-Field Sensing Strategies for the Active Control of the Sound Radiated from A Plate

Impedance-based control system and its application in active noise control - Theoretical analysis

Active Control of One-Dimension Impulsive Reflection Based on a Prediction Method.

A COMPARISON OF NEAR-FIELD ACOUSTIC ERROR SENSING STRATEGIES FOR THE ACTIVE CONTROL OF HARMONIC FREE FIELD SOUND RADIATION

Active Control Of The Directivity Of The Sound Diffraction From Barriers

A Near-Field Error Sensing Strategy for Compact Multi-Channel Active Sound Radiation Control in Free Field

Effect of a tilting reflective plane on the performance of an active noise control system

An Analytical Model for Understanding Active Directivity Noise Control with Near-Field Error Sensing