Abstract:Structure-acoustic coupled systems have received great attention in engineering, and a typical representative is a plate coupled with a cavity. The sound in the cavity is excited by the vibration of the plate and when there is strong coupling between the acoustic modes of the cavity and the vibrational modes of the plate, the sound pressure can be enhanced dramatically. In this paper, active control based on the pole placement method is used for the first time to reduce the noise in a plate-cavity coupled system. The principle of the pole assignment is that the poles of a system represent the system's dynamical behaviour, and their assignment allows one to modify the response of the system using sensors and actuators. In this work, the usage of pole assignment to modify the dynamics of the plate is theoretically derived, and the resulting sound in the cavity is analytically calculated by solving a coupled matrix equation. To access the performance of the pole placement method in reducing the noise in the coupled system, three example cases are considered. The first is a local control case which uses a single actuator to control the first two modes of the plate in order to attenuate the resulting sound in the cavity. The second case is imposing global control by using two actuators to modify the first four modes of the plate, weakening the strong interaction between the pate and the cavity by shifting their natural frequencies away from each other. The third is applying uncontrollability conditions to retain particular modes when the control method is applied. The analytical results show that the pole placement method can be effective to control both the vibration and the vibro-acoustics in the plate-cavity coupled system. The finite element (FE) method is used to validate the analytical models. The FE predictions show good agreement with the analytical results. The pole placement method is shown to be effective in controlling the noise in this plate-cavity coupled system, and there is the potential to extend the method to more complex structure-acoustic coupled systems.

Impedance-based control system and its application in active noise control - Theoretical analysis

A Method of Sound Field Control Using Beam Deflection

Simulation and Experimental Demonstration of Sound Field Control Using Beam Deflection

Noise Control for Slipway and Prediction of Barrier Noise Reduction Effect

Active sound control by directional secondary sources in the free field

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Acoustic Impedance Tuning with Active Disturbance Rejection Control

Performance of a Multichannel Active Sound Radiation Control System Near a Reflecting Surface

A study of sound intensity control for active noise barriers

A COMPARISON OF NEAR-FIELD ACOUSTIC ERROR SENSING STRATEGIES FOR THE ACTIVE CONTROL OF HARMONIC FREE FIELD SOUND RADIATION

An Analysis of a Feedback Active Noise Control System Using the Remote Microphone Technique

Stability Analysis and Active Damping Control for Master-Slave Controlled DC Microgrid

Design and Performance of a Hemi-Anechoic Room for Measurement of the Noise Emitted by Computer and Business Equipment

Active Control Of The Directivity Of The Sound Diffraction From Barriers

Active control of noise in plate-cavity coupled systems using the pole placement method

Performance of an Active Control System Near a Reflecting Surface

A Numerical Study on Active Noise Radiation Control Systems Between Two Parallel Reflecting Surfaces

An Integrated Passive and Active Control System for Reducing Haul Truck Noise

Near-Field Sensing Strategies for the Active Control of the Sound Radiated from A Plate

Effect of reflecting surfaces on the performance of active noise control

Study on Active Control of Sound Radiation From a Baffle in Sonar Equipment