Abstract:Reducing the vibration responses caused by the unbalance of the rotor is a crucial technology to ensure the safe and efficient operation of high-speed rotating machinery. For the flexible rotor system, the unbalance responses of rotors vary in different radial directions due to the anisotropic stiffness. The holospectrum technique using multi-sensor fusion provides ideas to solve this issue. The standard balancing method based on the holospectrum technique takes the Initial Phase Vector (IPV) as the balancing object, which could not represent the unbalance of flexible rotors correctly. In addition, the operating speed of the flexible rotor is generally higher than the first critical speed (FCS), making it necessary to fulfill the balancing of the first two modal shapes respectively in two steps. The above-mentioned procedure is not only very dangerous but also requires a large number of test runs resulting in corresponding wastages. In order to solve the issues mentioned above, a synchronous holo-balancing method for flexible rotors based on the modified initial phase vector (MIPV) is developed in this paper. Firstly, to tackle the limitation of IPV, the concept of equivalent rotating frequency circle is presented and then the MIPV is proposed as a new balancing object. MIPV could linearly represent the unbalance of the flexible rotor and increase the accuracy of holo-balancing. Secondly, the synchronous holo-balancing method is carried out to achieve the balancing at the speed below the FCS, reducing the complexity and danger of test runs at high operating speeds. And the synchronous balancing procedures based on the MIPV are further summarized in detail. Finally, two experimental results with different operating speeds and probe installations validate the feasibility and effectiveness of the proposed method. Compared with other traditional balancing methods, the proposed method can minimize the residual vibration and achieve state-of-the-art performances.

A Study on the Improvement of Balancing Target Selection and Holographic Dynamic Balancing Method

Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method

Rigid Rotor Dynamic Balancing with the Influence Coefficient Method

Unbalance related rotor precession behavior analysis and modification to the holobalancing method

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

An Improvement to Holospectrum Based Field Balancing Method by Reselection of Balancing Object

Precession Trend Analysis and Balancing Strategy for Rotors with Multi-fault

An Improved Holospectrum-Based Balancing Method for Rotor Systems with Anisotropic Stiffness

THE OPTIMIZATION TECHNIQUE-BASED BALANCING OF FLEXIBLE ROTORS WITHOUT TEST RUNS

A Balancing Method for Multi-Disc Flexible Rotors without Trial Weights

A Synchronous Holo-Balancing Method for Flexible Rotors Based on the Modified Initial Phase Vector

Unbalance Compensation by Recursive Seeking Unbalance Mass Position in Active Magnetic Bearing-Rotor System

Rotor balancing based on holospectrum analysis: principle and practice

Application of Precise Target Method on Dynamic Balance of Machine Tool Spindle

Phase Compensation Method of Holobalancing

The Study of an On-line Automatic Dynamic Balancing System and Its Dynamic Balancing Method when Used on a Flexible Rotor

Transient Balancing of Rotor Based on Non-stationary Information

Study on improving field first dynamic balancing precision of rigid rotors

Balancing of Flexible Rotors without Test Weights

Unbalance Identification of Nonlinear Rotor System Based on Holospectrum Analysis

A New Transient Field Balancing Method of A Rotor System Based on Empirical Mode Decomposition