Abstract:The rotor unbalance is a major source of rotor vibrations. Rotor vibrations often produce many undesired effects like noise, wear and fatigue, etc. In this paper, we try to seek the benchmark solutions for the unbalance responses of complex rotor-bearing system. The presented approach could be seen as the extension of transfer matrix method (TMM) in some sense. For the TMM, a disk or supporting structure cut off one uniform shaft element into two and someone must use the compatibility condition between these two new elements to derive the transitive matrix. However, for the presented approach, it directly solves the governing equations of uniform shaft elements with consideration of the effects of disks and supporting structures. Thus, this analytical approach is advantageous in reducing the times of matrix multiplication between state matrices and field matrices. One only needs to calculate the inversion of 16 × 16 dynamic stiffness matrix to find the steady state response. It saves the computer memory and is easy to be programmed. In addition, this analytical approach avoids the problems of selecting optimal discretization mesh densities in the case of FEM applications. For arbitrary linear boundary condition, the benchmark solutions are always easy to be obtained. The numerical simulation is carried out and two numerical examples are given to validate the new solutions. In which the finite element method is used as the numerical approach. Simulation results show that the benchmark solutions match very well with the FEM results. The effects of anisotropy in the supporting structures on the rotor's dynamic behavior, which are observed in this work, are also in accordance with many references. This validates the benchmark solutions further.

A Study of the Supporting Modes for a Long Overhanging Rotor During a High-speed Dynamic Balancing Process

Rigid Rotor Dynamic Balancing with the Influence Coefficient Method

High-speed Dynamic Balancing Method for Low Pressure Rotor of a Large Steam Turbine Based on Modal Shape Analysis

The Study on Mode Dynamic Balance Method for Rotor System with Bow

Whole-machine Dynamic Balancing Method Without Trial Weights for Multi-span Rotor Shafting Based on Dynamic Finite Element Model

Balancing of flexible rotors without trial weights based on finite element modal analysis

On-line Unbalance Identification of Flexible Rotor System

Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method

Unbalance response analysis of the circumferential tie-rod combined rotor considering different support

The Study of an On-line Automatic Dynamic Balancing System and Its Dynamic Balancing Method when Used on a Flexible Rotor

A Balancing Method for Multi-Disc Flexible Rotors without Trial Weights

Field Dynamic Balance Method Study for the AMB - Flexible Rotor System

Benchmark solutions for the dynamic analysis of general rotor-bearing system with arbitrary linear boundary conditions

Fault Analysis and Optimal Balancing of Bowing of Steam Turbine Rotor Under Long-Term Service

Development and Experimental Validation of a Model-Based Balancing Prediction Method for Bowed Rotor

Study on the Maximum Allowable Unbalance of the High-speed Rotor Based on the Dynamic Load Capacity of Gas Foil Bearings

STUDY ON HIGH ACCURACY BALANCING METHODS FOR HUGE ROTOR

Analytical and experimental study on dynamic characters of rod-fastening rotor-bearing system under saturated pretension

Dynamics of a Rod-Fastened Rotor Considering the Bolt Loosening Effect

Investigations on the nonlinear dynamic characteristics of a rotor supported by hybrid foil magnetic bearings

Supporting Characteristics of Bearings and Their Effects on Dynamical Behaviors of Rotor System