Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

All-optically Tuned Delay Characteristics of Fibre Bragg Grating

All-optically tuned fiber Bragg grating delay line by self-pumping

Characteristics of A Tunable Microwave Photonics Notch Filter Based on Two Fiber Bragg Gratings

Tunable delay slow-light in an active fiber Bragg grating.

Microcavity-coupled fiber Bragg grating with tunable reflection spectra and speed of light

A Novel High-Sensitivity Chirp Tuning Device of Fiber Grating

Tunable Direct Writing of FBGs into a Non-Photosensitive Tm-Doped Fiber Core with an Fs Laser and Phase Mask

Phase-shifted Gratings Fabricated with Femtosecond Laser by Overlapped Two Types of Fiber Bragg Gratings

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Development of a Device with Controllably Tuning Bandwidth of Fiber Bragg Grating

A Tunable Bragg Grating Optical Delay Line Based on Chirp Dynamic Tuning

All-fiber Chirp Tuning of Ultrashort Pulses Via Long Chirped Fiber Bragg Grating Pair

Tunable methods of long period fiber gratings

Thermally Tunable Dispersion Compensator in 40-Gb/s System Using FBG Fabricated with Linearly Chirped Phase Mask

Fiber Bragg gratings fabricated in fibers with different geometries by femtosecond laser written through the coating and their applications in strain sensing and fiber laser

Sensitivity-Tunable FBG Interrogation System Utilizing a Mechanically Induced Long Period Fiber Grating

A linear chirp fiber Bragg grating with tunable bandwidth enabled by MXene's photothermal effect

Realization and Modulation of Fano-Like Lineshape in Fiber Bragg Gratings

Tunable Fiber-Optic Delay Line Based on Stimulated Brillouin Scattering

Investigating key factors for optimizing FBG inscribed by femtosecond laser

Delay Compensated FBG Demodulation System Based on Fourier Domain Mode-Locked Lasers