Abstract:This study used an analytical model to investigate the factors that affect the reconstruction accuracy composed of the baseline length, lens focal length, the angle between the optical axis and baseline, and the field of the view angle. Firstly, the theoretical expressions of the above factors and measurement errors are derived based on the binocular three-dimensional reconstruction model. Then, the structural parameters’ impact on the error propagation coefficient is analyzed and simulated using MATLAB software. The results show that structural parameters significantly impact the error propagation coefficient, and the reasonable range of structural parameters is pointed out. When the angle between the optical axis of the binocular camera and the baseline is between 30° and 55°, the ratio of the baseline length to the focal length can be reasonably reduced. In addition, using the field angle of the view that does not exceed 20° could reduce the error propagation coefficient. While the angle between the binocular optical axis and the baseline is between 40° and 50°, the reconstruction result has the highest accuracy, changing the angle out of this range will lead to an increase in the reconstruction error. The angle between the binocular optical axis and the baseline changes 30° through 60° leads to the error propagation coefficient being in a lower range. Finally, experimental verification and simulation results show that selecting reasonable structural parameters could significantly reduce measurement errors. This study proposes a model that constructs a binocular three-dimensional reconstruction system with high precision. A portable three-dimensional reconstruction system is built in the article.

Structural Parameters Optimal Design and Accuracy Analysis for Binocular Vision Measure System

Structural parameter design and accuracy analysis of binocular vision measuring system

Research on Structural Parameter Optimization of Binocular Vision Measuring System for Parallel Mechanism

Analysis on Structural Parameters of Binocular Stereo Vision System

System Structural Error Analysis in Binocular Vision Measurement Systems

Layout optimization of binocular stereo vision measuring system

Modeling and Simulating of Optimization-Design for Structure Parameters of Ccd Intersection Measurement System

Space Resolution and Structural Parameters of Stereo Vision System

The analysis of the structural parameter influences on measurement errors in a binocular 3D reconstruction system: a portable 3D system

Online Stereo Vision Measurement Based on Correction of Sensor Structural Parameters

Analysis and Application on Uncertain Zone in Binocular Vision

Study on High-Precision Inspection Multi-Vision Cameras Space Layout

Structural parameters analysis and optimization of line-structured light measuring system

Accuracy Analysis of Binocular Vision System

Precise Calibration Of Binocular Vision System Used For Vision Measurement

Structural Parameters Calibration for Binocular Stereo Vision Sensors Using a Double-Sphere Target

Structural parameters optimization and accuracy analysis for intersection measuring system with double-charge coupled device

Precise Calibration of Binocular Vision System Used for Vision Measurement.

Structure Design of Binocular Vision Sensor Using Mono-camera with Mirrors

Precision Calibration Method for Binocular Vision Measurement Systems Based on Arbitrary Translations and 3D-Connection Information

Calibration Error Simulating Analysis of Binocular Vision Based on Pinhole Camera Model