Abstract:Camera and system parameters calibration is an essential process for a distance measuring system using binocular stereo vision. In usual ways of calibration, brightly colored objects are put at the center of the area of surveillance to avoid big errors in measurement as targets are far away from the center. When calibration objects are not allowed to be put in the sensing area of interest, they should be placed somewhere else outside. A scheme of calibration is proposed for system parameters correction in super-size two dimensional scale events sensing and positioning system using binocular stereo vision. The location of a reference point is specified at the center of the surveillance area of about 200,000 meters square, and the coordinate of the center is known in the physical world. Coordinates of cameras and calibration objects outside the surveillance area are measured in physical world coordinates system. It is convenient to compute the angle between the side connecting camera with the calibration object and the one connecting the same camera with the reference point using the longitude and altitude values measured. When calibration is performed, orientation of the camera is obtained and position of the object on the imaging plane is read out in pixels. Rotating the camera with the angle computed above, the reference point would be on the optical axis of the camera in the ideal case. The accuracy of the device for measuring the angle contributes to the error in aligning the optical axis passing through the reference point. In the experiment, when putting a calibration object at the reference point, the position of the object on an imaging plane could be read out in pixels. Comparing the difference of pixels between the two orientations of the camera, errors caused by rotating the camera can be determined. When another camera is configured to form a binocular stereo vision system, parameters are calibrated in the same way. Theoretical analysis shows that the error caused by adjusting two cameras is limited by a shape that approximates a quadrilateral. The area of the quadrilateral is determined by both the accuracy of the angle measuring device and the distances between the cameras and the reference point. Comparison of theoretical with experimental results is made, indicating the effectiveness of this scheme.

Structural Parameters Calibration for Binocular Stereo Vision Sensors Using a Double-Sphere Target

A Calibration Method for Binocular Stereo Vision Sensor with Short-Baseline Based on 3D Flexible Control Field

On-site Calibration Method for Outdoor Binocular Stereo Vision Sensors

Calibration of Binocular Vision Sensor with Large Field-of-View Based on Two Small Planar Targets

A Scheme For Parameter Calibration In Super-Size Two-Dimensional Scale Events Sensing And Positioning System Using Binocular Stereo Vision

Precise and Robust Binocular Camera Calibration Based on Multiple Constraints

Calibration of Binocular Vision Sensors Based on Unknown-Sized Elliptical Stripe Images

Vanishing feature constraints calibration method for binocular vision sensor.

An Onsite Structure Parameters Calibration Of Large Fov Binocular Stereovision Based On Small-Size 2d Target

Structural parameter design and accuracy analysis of binocular vision measuring system

A cross-target-based accurate calibration method of binocular stereo systems with large-scale field-of-view

A Calibration Method for Stereo Vision Sensor with Large FOV Based on 1D Targets

Determination of Focal Length for Targets Positioning with Binocular Stereo Vision.

A Novel Approach To Calibrating Multifunctional Binocular Stereovision Sensor

Extrinsic Parameter Calibration of Stereo Vision Sensors Using Spot Laser Projector.

Analysis on Location Accuracy for the Binocular Stereo Vision System

High Precision Calibration of Vision Measurement System in Large FOV Based on Virtual 3D Target

Modeling of Binocular Stereo Vision for Remote Coordinate Measurement and Fast Calibration

An On-Line Calibration Algorithm for External Parameters of Visual System Based on Binocular Stereo Cameras

A Calibration Method for Stereovision System Based on Solid Circle Target

Flexible Calibration Method for A Quad-directional Stereo Vision Sensor Based on Unconstraint 3D Target