Abstract:This study used an analytical model to investigate the factors that affect the reconstruction accuracy composed of the baseline length, lens focal length, the angle between the optical axis and baseline, and the field of the view angle. Firstly, the theoretical expressions of the above factors and measurement errors are derived based on the binocular three-dimensional reconstruction model. Then, the structural parameters’ impact on the error propagation coefficient is analyzed and simulated using MATLAB software. The results show that structural parameters significantly impact the error propagation coefficient, and the reasonable range of structural parameters is pointed out. When the angle between the optical axis of the binocular camera and the baseline is between 30° and 55°, the ratio of the baseline length to the focal length can be reasonably reduced. In addition, using the field angle of the view that does not exceed 20° could reduce the error propagation coefficient. While the angle between the binocular optical axis and the baseline is between 40° and 50°, the reconstruction result has the highest accuracy, changing the angle out of this range will lead to an increase in the reconstruction error. The angle between the binocular optical axis and the baseline changes 30° through 60° leads to the error propagation coefficient being in a lower range. Finally, experimental verification and simulation results show that selecting reasonable structural parameters could significantly reduce measurement errors. This study proposes a model that constructs a binocular three-dimensional reconstruction system with high precision. A portable three-dimensional reconstruction system is built in the article.

Accuracy Analysis of Binocular Vision System

System Structural Error Analysis in Binocular Vision Measurement Systems

Precise and Robust Binocular Camera Calibration Based on Multiple Constraints

Analysis on Structural Parameters of Binocular Stereo Vision System

The analysis of the structural parameter influences on measurement errors in a binocular 3D reconstruction system: a portable 3D system

Measurement Error Analysis and Accuracy Enhancement of 2D Vision System for Robotic Drilling

Analysis on Location Accuracy for the Binocular Stereo Vision System

A New Method for Increasing Accuracy of Distance Measurement Based on Single Visual Camera

Accuracy Analysis and Verification Method on Vision Position-pose Measurement System

Binocular vision system calibration based on a one-dimensional target.

Distance measuring modeling and error analysis of dual-CCD vision system simulating human eyes and neck

An Optimization Based Vision Calibration Method for PTZ Camera's Errors in Model and Execution

Sensitivity analysis of the error factors in the binocular vision measurement system

Vanishing feature constraints calibration method for binocular vision sensor.

An improved measurement model of binocular vision using geometrical approximation

Corrected calibration algorithm with a fixed constraint relationship and an error compensation technique for a binocular vision measurement system.

Accuracy Improvement of Binocular Vision Measurement System for Slope Deformation Monitoring

Binocular optical axis parallelism detection precision analysis based on Monte Carlo method

Improved Calibration of Eye-in-Hand Robotic Vision System Based on Binocular Sensor

A binocular camera calibration method based on circle detection

Modeling and analysis of pixel quantization error of binocular vision system with unequal focal length